User manual PLUSTEK SMARTOFFICE PL7000

[. . . ] The product is designed and produced to achieve sustainable environmental improvement. We strive to produce products in compliance with global environmental standards. Attention to recycling (For EU countries only) Protect your environment!If you are using Windows Vista or 2000, your screens will look somewhat different but function the same. Table of Contents Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Check "Show all windows" to display all the motion windows in the camera view. Uncheck the option if you only want to see the red motion window activated and ready for setting. Click "Delete" button if you want to delete the active motion window. 20 10. Please make sure to click "Apply" button in order to save the changes you've made. Click "Close" or Maximize/Restore button to exit the setting status. Information The Motion Detection settings for a camera won't take effect until you configure Motion Detection as an Event Trigger for the camera. Please refer to the Event Settings section for more information. Video Settings To set video display: 1. Go to the "Advanced" page then click the menu "IPCam" "Video Settings". Select the camera you want to adjust the video settings for from the dropdown list. In "Image Appearance" section, you may adjust the Resolution, Quality, Rotation angle, Color saturation, Brightness, and Sharpness for the video image displayed by the camera. In the "Overlay Settings" section, you can add some text information to the video image, such as Data/time and a text title. You may choose Top or Bottom from the dropdown list to display the information at the top or bottom of the image. The Administrator has access right to all the functions of the NVR in the "Live View" and "Advanced" pages. Maintenance Go to the "Advanced" page then click the menu "System" "Maintenance" to display the Maintenance page. In the maintenance page, you may update firmware, backup and restore settings, reset, restart, or turn off the NVR system. Update firmware To update the NVR firmware: 1. Click on the "Browse" button to find the latest firmware you have downloaded. Click on the "Upgrade" button to load the firmware in your NVR and the upgrade will start automatically. The NVR system will automatically restart after the update is complete. Backup settings To backup the current settings: Click on the "Backup" button to backup all the settings you've made in the NVR system, and a window will pop up asking you to save the backup file named as "NvrHistory. tar. gz". You may choose a saving folder for the backup file. 24 Restore settings To restore previous settings: You may restore the NVR to previous settings by loading a saved backup file. (See the above Backup settings section for more information on how to backup system settings. ) 1. Click on the "Browse" button to find the backup file you have saved. Click the "Restore" button and the restoration will start automatically. The system will restart after the restoration is complete. Reset to default Click the "Default" button and you will reset the NVR to the default factory settings. System restart Click "Restart" button to restart the NVR. The NVR will restart in 60 seconds. Power off You may turn off the NVR by clicking the "Power off" button. Log Go to the "Advanced" page then click the menu "System" "Log" to display the Log page. [. . . ] One of our representatives will be happy to assist you from Monday through Friday in office working hours as shown below: Europe Other Countries or Areas 9:00 a. m. Taiwan Time To avoid delays, please have the following information available before calling: · · · · · · · NVR name and model number NVR serial number (Located at the bottom of the NVR) A detailed description of the problem Your computer manufacturer and its model number The speed of your CPU (Pentium 4, etc. ) Your current operating system and BIOS (optional) Name of software package(s), version or release number and manufacturer of the software · Other USB devices installed Statement of Limited Warranty This Statement of Limited Warranty applies only to the options you originally purchase for your use, and not for resale, from an authorized reseller. The manufacturer warranty includes all parts and labor, and is not valid without the receipt of original purchase. To obtain warranty service, you may contact the authorized dealer or distributor, or visit our website to check out the available service information, or send a request via E-mail for further help. [. . . ]