User manual PLUS U5-632

[. . . ] DATA PROJECTOR User's Manual U N R E E M T E N E C A N C Y B D N TA S R G B V ID E O F R L E E Z (U5-532/U5-512) M O ZO 2 4 R E TIM / K L LIC E -C C R AN C TE U M IMPORTANT * DLPTM (Digital Light Processing) and DMD (Digital Micromirror Device) are registered trademarks of Texas Instruments Incorporated (U. S. A. ). * DMD is an ultra-precise part developed by Texas Instruments (U. S. A. ) which takes the place of liquid crystal (in the projector). * VGA and XGA are trademarks or registered trademarks of International Business Machines Corporation (U. S. A. ). * S-VGA is a registered trademark of Video Electronics Standards Association. [. . . ] (Portion that extend off screen is cut. ) Aspect ratio selection Auto Wide Zoom 4:3 screen 16:9 screen Note: When selection has been made for the "Real" setting of the personal computer signal (i. e. , when the input signal and the projector display resolution are high) and the "Zoom" setting of the video signal, pressing the SELECT ( ) buttons on the remote control will permit movement of the display position. Note that there will not be any movement when the menu or the quick menu is displayed. E-29 General Operation Freezing a Moving Picture This function is used to stop and view a moving picture. Note that the input image continues to advance even though the picture there is a still picture condition. A further press returns the screen to a moving picture. STANDBY MENU STANDBY LASER RGB ENTER RGB VIDEO AUTO VIDEO CANCEL QUICK MENU QUICK Q Q FREEZE MUTE ECO AUTO 1 ENTER R-CLICK/ CANCEL VOL 2 3 4 ASPECT KSTN ZOOM TIMER FREEZE MUTE TIMER 1 VOL 2 ZOOM 3 4 Cancelling Video and Audio Temporarily This function is used to cancel the video and audio at the same time. STANDBY MENU STANDBY A press of the MUTE button will blank the picture and the sound, and the screen will take on the background color that has been set. Another press will cause a return to the original conditions. LASER RGB ENTER RGB VIDEO AUTO VIDEO CANCEL QUICK MENU QUICK Q Q FREEZE MUTE ECO AUTO 1 ENTER R-CLICK/ CANCEL VOL 2 3 4 ASPECT KSTN ZOOM TIMER FREEZE MUTE TIMER 1 VOL 2 ZOOM 3 4 Lamp Mode Applicable Projector: U5-532/U5-512 Use this if the picture is projected on a small screen and the picture is too bright or when projecting images in dark rooms. Pressing the ECO button will set the lamp mode. STATUS indicator STATUS Eco (STATUS indicator is lit green) Lamp brightness is set to 80% and the lamp life is extended. STANDBY Normal (STATUS indicator is off) Lamp brightness is set to 100% and the screen is bright. Note: Frequent switching this mode can degrade the lamp. For the U5-632 projector, these operations are possible using the menus. See E-55 [Lamp Mode]. STANDBY MENU RGB ENTER VIDEO CANCEL QUICK Q FREEZE MUTE ECO AUTO 1 2 3 4 ASPECT VOL KSTN ZOOM TIMER E-30 General Operation Keystone Applicable Projector: U5-532/U5-512 Use this to adjust for trapezoidal (keystone) distortion of the projected image. Adjustment Method (1) Press the or KSTN button to make the left and right sides parallel. The keystone adjustment display appears when one of the buttons is pressed. STANDBY MENU RGB ENTER VIDEO CANCEL QUICK Q (2) FREEZE MUTE ECO AUTO 1 2 3 4 ASPECT VOL KSTN ZOOM TIMER (1) Press the button. Press the button. For the U5-632 projector, these operations are possible using the menu. See E-39, 53. (2) Press the CANCEL button to immediately close the display. The display will close when there has not been an operation in about 10 seconds. Note: * Keystone adjustment values can be saved. * Screen examples have been drawn in an exaggerated style for the purpose of description. * Please note that depending on the projected picture and the projection conditions, it may not be possible to eliminate keystone distortion completely. Adjustment of the Volume This function adjusts the volume of the built-in speaker. STANDBY MENU STANDBY (1) Press the or VOL button to adjust the volume. The volume adjustment display appears when one of the buttons is pressed. LASER RGB ENTER RGB VIDEO AUTO VIDEO CANCEL QUICK MENU QUICK Q Q FREEZE MUTE ECO AUTO (2) 1 2 3 4 ASPECT ENTER R-CLICK/ CANCEL VOL KSTN ZOOM TIMER The button increases the volume and the volume. button decreases the (2) FREEZE MUTE TIMER 1 2 ZOOM (2) Press the CANCEL button to immediately close the display. The display will close when there has not been an operation in about 10 seconds. VOL 3 4 (1) Note: * Adjustment of the volume will not produce any sound unless an image is being projected. * Please make connections to the AUDIO connectors of the projector with the supplied audio cable. (1) E-31 General Operation Enlargement of the Image and Video Movement This function digitally enlarges the personal computer image and video image. The zoom display appears when the ZOOM button is pressed. STANDBY LASER RGB VIDEO AUTO MENU QUICK Q (2) ENTER R-CLICK/ CANCEL Each press of the button enlarges the image and each press of the button makes the image smaller (returning it to 1:1). (3) FREEZE MUTE TIMER 1 VOL 2 ZOOM (1) 3 4 Zoom 0 Zoom 21 (No enlargement) (Approximately 2 times enlargement) STANDBY MENU RGB ENTER VIDEO CANCEL QUICK (2) (3) (2) Pressing the SELECT ( ) buttons on the remote control at the time of the zoom operation will cause the display position to move. (There will not be any movement when zoom is at 0. ) Q FREEZE MUTE ECO AUTO 1 2 3 4 ASPECT VOL KSTN ZOOM TIMER (1) Zoom 21 Zoom 21 (Approximately 2 times enlargement) (Movement) (3) Press the CANCEL button to immediately close the display. The display will close when there has not been an operation in about 10 seconds. Note: After magnifying the image, be sure to use the ZOOM button to bring the gauge value back to "0". The image can also be moved in the following circumstances. · · When "Aspect" is set to "Real" by the signal of the personal computer, and the input resolution is higher than the display resolution of the projector. When "Aspect" is set to "Zoom" by the video signal. Note: * Zoom and image movement functions are cancelled when the input is switched. * The greater the zoom enlargement, the less distinct the image will appear. The reason for this is that the dots are being digitally corrected so that they are not conspicuous. [. . . ] (The rated service life of the lamp means the average value of lamp life for lamps that have been manufactured over a long period, and it is derived from test conditions at this company. ) · When the life of the lamp is exceeded, the STATUS indicator lights a steady red and the message [Replace the Lamp Cartridge] is displayed on the screen. · If the projector is used another 100 hours after the lamp's service life is reached, the power is set to the standby mode and no longer turns on. · Contact a store that sells the U5-632/U5-532/U5-512 for a replacement lamp. Indicate you need a U5-200 replacement lamp for the U5-632/U5-532/U5-512 (order code 28-050). CAUTION · Replacement of the lamp cartridge is performed after switching off the power, waiting for the cooling fan to stop, disconnecting the power plug from the power outlet, and then leaving the projector for about 60 minutes before replacement is started. [. . . ]