User manual PLANTRONICS VODAFONE VBH 300 DECLARATION OF CONFORMITY

[. . . ] US Connect the supplied wall charger to AC power and then to your headset. The Status Indicator will be illuminated red while charging and change to blue when the headset is fully charged. The headset must be charged for a minimum of 20 minutes prior to use ­ 3 hours to fully charge. [. . . ] Do not use the headset while charging and do not connect the charger while the headset is in use. US Press and hold the Power/Mute Button for three seconds (long press) to turn the headset on or off. US Before using your headset for the first time, you must pair it with another Bluetooth device, such as a mobile phone. US Use your phone's menu to search for Bluetooth audio devices and select "PLT 510" when it appears on the display. Note: In some circumstances the pairing process can take up to 2 minutes to complete. Release the buttons when the Status Indicator begins to flash red then blue. The Status Indicator flashes blue, once the headset is successfully paired. US The following additional features may be available if your phone supports the Handsfree Profile. However, the use of wireless radios may be restricted in some situations or environments, such as aboard airplanes. If you are unsure of restrictions, you are encouraged to ask for authorization before turning on the wireless radio. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. [. . . ] However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. This is not a condition of your warranty, Ces informations faciliteront l'assistance but will assist us in providing the best technique et les services que nous possible service and technical support vous proposons : il ne s'agit pas d'une for your product. [. . . ]