User manual PLANTRONICS PULSAR 260

[. . . ] USER GUIDE PLANTRONICS PULSARTM 260 STEREO BLUETOOTH HEADSET WELCOME This user guide provides instructions on the setup and usage of the Plantronics PulsarTM 260 Bluetooth® Headset. Before getting started, please review the safety booklet included in your package. [. . . ] Power on both the stereo Bluetooth pod and your speakers/home stereo. Mute call/audio Repeating low tone every 60 seconds High tone Play and pause* Short press to pause/ resume audio Short press Adjusting volume Mid tone for each adjustment, double low tone at limit *Only works if Bluetooth device supports Bluetooth Audio/Video Remote Control Profile (AVRCP). 6 | | 7 HEADSET CONTROLS TROUBLESHOOTING Problem My headset does not work with my phone. · Ensure pod is powered on and headset is paired with audio device. Walk to within 10 metres of the phone and check the Bluetooth link on your phone's display. Press the volume/mute button to increase the sound heard in the headset. · Pod must be turned on and connected to the powered speakers/Hi-Fi with the audio-out cable. · Check music player on Bluetooth phone is switched on and Pulsar 260 is the active Bluetooth device. Callers say my voice is too quiet. I cannot hear caller/dial tone or audio sound. KEY FEATURE Making/answering/ending calls Switching an active call from headset to phone or phone to headset Action Short key press Tone High tone I cannot hear music from my powered speakers/Hi-Fi when using the audio-out cable. Long key press High tone followed by low SYSTEM RESET A reset button is located (recessed) behind the clothing clip. Hands-free features KEY FEATURE Activate last number redial Activate voice dial Action Double short key press Tone High tone for each key press High tone followed by low High tone followed by low 1 To reset: 1. Press and release button using a pen. 2 Long key press Call reject Long key press 2 Features must be supported by Bluetooth device or service provider. 8 | | 9 PRODUCT SPECIFICATIONS Listen time* Talk time* Standby time* Charge time Range Headset and pod weight Power requirements Battery type Speaker frequency response Impedance Distortion Version Up to 7 hours Up to 9 hours Up to 200 hours 3 hours Bluetooth standard 10 metres 25 grams 5VDC - 300 mA Lithium ion polymer · Telephony 300 Hz to 3600 Hz (CVSD) · Stereo audio 20 Hz to 20 kHz (16-bit 48 kHz SBC coding) 32 +-4 Ohms x1 kHz <5% to 19 kHz Bluetooth 2. 0 TECHNICAL ASSISTANCE Visit our web site at www. plantronics. com/support for technical support including frequently asked questions, compatibility and accessibility information. The Plantronics Technical Assistance Centre (TAC) is also ready to assist you on 0800 410014 from the UK. EXPOSURE TO RF RADIATION The internal wireless radio operates within the guidelines found in radio frequency safety standards and recommendations, which reflect the consensus of the scientific community. Independent studies have shown that the internal wireless radio is safe for use by consumers. [. . . ] Plantronics, the logo design, Plantronics Sound Innovation and Pulsar are trademarks or registered trademarks of Plantronics, Inc. The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. [. . . ]