User manual PLANTRONICS PLUG-PRONG ADAPTER

[. . . ] Installation for units with a push-to-talk button Your headset is equipped with a push-to-talk button that can be adjusted with a screwdriver to be either lockable or nonlockable. When the button is depressed or locked in the ON position, the microphone is turned on and will transmit your voice. Service warranty repairs and How to Obtain Warranty Repairs To obtain warranty repairs, return the unit(s), shipping prepaid, to: Plantronics Service Center Operations 345 Encinal Street Santa Cruz, CA 95061-0635 Please use the original container, or pack the unit(s) in a sturdy carton with sufficient packing material to prevent damage. [. . . ] For more information: www. plantronics. com welcome to hands-free communications from Plantronics With a Plantronics headset, you will experience a level of comfort and on-the-job freedom you may have never felt before. To obtain maximum performance, please read the adapter installation and usage information contained in this manual. For information on headset operation, please refer to your headset manual. If you have any questions, please call Plantronics: 1(800) 544-4660 how to select the lockable or nonlockable switch position lockable position Note that the selector slot is aligned vertically. The push-to-talk button can be depressed momentarily or locked in the ON position by first depressing then sliding the button until it locks. plug prong adapters Simply plug into the appropriate jack in your station or jackset. The adapters are universal and may be positioned so that either side is visible. nonlockable position Turn the selector horizon-tally. The pushto-talk button can be depressed momentarily when you wish to speak. fcc registration information FEDERAL COMMUNICATIONS COMMISSION (FCC) INFORMATION FCC Requirements - Part 68 1. The FCC has established Rules which permit this device to be directly connected to the telephone network. If this device is malfunctioning, it may also be causing harm to the telephone network; this device should be disconnected until the source of the problem can be determined and until repair has been made. If this is not done, the telephone company may temporarily disconnect service. The telephone company may make changes in its technical operations and procedures; if such changes affect the compatibility or use of this device, the telephone company is required to give adequate notice of the changes. [. . . ] It is the responsibility of users requiring service to report the need for service to Plantronics or one of its authorized agents. Service can be obtained at the facility listed in the Warranty Information section. plug prong adapters Printed in USA © Plantronics, Inc. [. . . ]