User manual PLANTRONICS EXPLORER 390

[. . . ] 5 Adjusting the Fit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Headset Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Using More Than One Bluetooth Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] For most phones, select Settings/Tools > Connections > Bluetooth > Search > 3xxPlantronics. Pairing is successful when the indicator on your headset flashes blue. Your headset is now connected and ready to use. 4 NOTE This headset is equipped with Secure Simple Pairing (SSP). If your phone supports SSP, you will not have to follow step 4; you will instead see a message on your phone alerting you to a successful pairing. 5 Adjusting the Fit 1 1 Right Left 2 2 1 2 3 4 5 To remove the earloop, gently pull up on earloop near the Plantronics name until you hear a snap. Rotate the headset so that the speaker/eartip rests comfortably in your ear. Callers can hear you best when you point the microphone towards the corner of your mouth. 4 3 6 5 Headset Controls Turn on the headset Press and hold the call control button until the indicator glows blue. Turn off the headset Press and hold the call control button until the indicator glows red. When you receive a call, your phone may ring before your headset rings. Wait until you hear the ring in your headset before you press the call control button to answer the call. Reject a call Make a call When phone rings, press and hold the call control button until you hear a single low note. Enter number on your phone, press send, and the call is automatically transferred to headset. (There are five volume levels. ) WARNiNG: Do not use headphones/headsets at high volumes for an extended period of time. See www. plantronics. com/ healthandsafety for more information on headsets and hearing. Adjust the volume 7 Headset Controls Transfer a call from headset to phone Transfer a call from phone to headset Check battery charge While on a call, press and hold the call control button until you hear a single long low tone. While on a call, press and hold the call control button until you hear a single short low tone. While the headset is on (but not on a call), press and hold the call control and volume buttons. The indicator light will blink red once for a full battery, twice for 2/3 charge, or three times for 1/3 charge. While the headset is off, press and hold the call control and volume buttons. The indicator light will flash blue twice when Multi-Point turns on, or once when it turns off. While the headset is on (but not on a call), press and hold the call control button while connecting the headset to any charging accessory. Turn Multi-Point on or off (available on Explorer 390 series only) Hard reset Range To maintain a connection, keep your headset within 33 feet (10 meters) of the Bluetooth device. If there are obstacles between your headset and the device, you may experience interference. For optimal performance, place your headset and phone on the same side of your body. [. . . ] Independent studies have shown that the internal wireless radio is safe for use by consumers. US FCC REQUIREMENTS PART 15 This device complies with Part 15 of the FCC Rules. This device must accept any interference received, including interference that may cause undesired operation. This device and its antenna must not be collocated or operated in conjunction with any other antenna or transmitter. To comply with FCC RF exposure requirements, only use supplied antenna. [. . . ]