User manual PLANTRONICS DISCOVERY 640X DECLARATION OF CONFORMITY

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PLANTRONICS DISCOVERY 640X. We hope that this PLANTRONICS DISCOVERY 640X user guide will be useful to you.


PLANTRONICS DISCOVERY 640X DECLARATION OF CONFORMITY: Download the complete user guide (59 Ko)

Manual abstract: user guide PLANTRONICS DISCOVERY 640XDECLARATION OF CONFORMITY

Detailed instructions for use are in the User's Guide.

[. . . ] Snap the headset charging pocket onto the vehicle charging adapter as shown. Plug the vehicle charging adapter into vehicle power socket and adjust the charging pocket angle so that the headset is within easy reach. CAUTION Select a mounting option that does not interfere with car controls. If power is available to the vehicle power socket, the charging pocket will flash when the headset is docked. [. . . ] The green indicator on the vehicle charging adapter lights when power is supplied. Use the USB charging cable to connect the headset charging pocket to your computer or laptop. Turn your computer or laptop on. 12 Volts 1. 2. 12 Volts 3. 5 PAIRING 1. 2. 3. Before using your headset for the first time, you must pair it with your Bluetooth phone or device. For set up and pairing instructions with Bluetooth devices other than mobile phones, please consult your Bluetooth device user guide. Press and hold down the call control button for 10 seconds until the headset status indicator begins to flash red then blue. While the headset is flashing, use the phone menu to search for Bluetooth devices and select "6xxPlantronics". Headset will flash blue when paired successfully. 6 POWERING 1. Turn on the headset by pressing and holding the call control button until the indicator light glows blue. If you are wearing the headset, you will hear a beep when the power turns on. The indicator light will flash blue every 5 seconds when the power is on. 2. See your Bluetooth phone manual for instructions. Rejecting a Call When receiving an incoming call, press and hold the call control button for 8 seconds to reject the call. Switching a Call from Phone to Headset To switch an active call from your phone to your headset, briefly press the call control button for 2 seconds. Switching a Call from Headset to Phone To switch an active call from your headset to your phone, press and hold the call control button for 2 seconds. MOVING OUT OF RANGE As the headset moves more than 33 feet (10 meters) away from the Bluetooth device or encounters interference: · Audio quality will degrade · A beep will be heard in the headset when the connection drops between headset and Bluetooth device · When out of range, only the power off function will operate If any of the above occur, move closer to your Bluetooth device. 10 INDICATOR LIGHTS Headset Status Powering on Power on Powering off Power off Charging battery Battery fully charged Low battery Pairing mode Missed call Ringing Headset Indicator Light Blue light appears and flashes every 6 seconds Blue light flashes every 5 seconds. Red then blue light flashes for 120 seconds Purple light flashes every 5 seconds. Purple light flashes rapidly. Headset in pocket (Discovery 655) Headset vibrates to indicate incoming call. Headset in pocket and connected Headset and charging pocket light up to to power source (Discovery 665)* indicate incoming call. On Line Indicator (OLI) Blue light flashes every 10 seconds. *If no power source is connected, charging pocket will not light up. 11 OPTIONAL ACCESSORIES A AILABLE FOR PURCHASE V 73646-01 Vehicle Charging Adapter 69519-01 USB Headset Charger 73647-01 Soft Gel Ear Tips and Ear Loop MOTOROLA PALM 73649-01 AAA Battery Charger NOKIA SONY 73650-01 4-pack Charge Adapter Kit 73651-01 Mini USB Charger To order, please contact your Plantronics supplier or go to www. plantronics. com. 12 TROUBLESHOOTING PROBLEM My headset does not work with my phone. SOLUTION Headset was not in pairing mode when mobile phone menu selections were made. Press the call control button for approximately 10 seconds until you hear a beep or see the indicator light glow blue to turn headset on. Charge your battery using the AC charger, AAA battery, mini USB charger, or vehicle charging adapter above. Press the volume/ mute button to increase the sound heard in the headset. PRODUCT SPECIFICATIONS Talk time* Standby time* Charge time Range Power requirements Battery type Version Up to 3. 5 hours Approximately 80 hours 3 hours Bluetooth standard 33 feet (10 meters) 5V DC ­ 300 mA Lithium Ion Bluetooth 2. 0 Supports Bluetooth Hands-Free and Headset Profiles. *Performance may vary by device. 13 TECHNICAL ASSISTANCE Visit our Web site at www. plantronics. com/support for technical support including frequently asked questions, compatibility and accessibility information. The Plantronics Technical Assistance Center (TAC) is also ready to assist you on 866-363-BLUE (2583). WARRANTY LIMITED W ARRANTY · This warranty covers defects in materials and workmanship of products manufactured, sold or certified by Plantronics which were purchased and used in the United States. · The warranty lasts for one year from the date of purchase of the products. [. . . ] · This warranty extends to you only if you are the end user with the original purchase receipt. · We will at our option, repair or replace the products that do not conform to the warranty. We may use functionally equivalent reconditioned/refurbished/remanufactured/pre-owned or new products or parts. · To obtain service in the U. S. , contact Plantronics at (866) 363-BLUE (2583). [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE PLANTRONICS DISCOVERY 640X




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PLANTRONICS DISCOVERY 640X will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.