User manual PLANTRONICS CT12

[. . . ] CORDLESS HEADSET TELEPHONE CT11/12 CT11 CT12 PRODUCT INFORMATION BOOKLET BASICS WELCOME This Product Information Booklet contains features and operations not described in the Quick Start Guide (QSG). The QSG also includes warranty information, FCC and the Industry Canada Notice. BASICS . 47 There are three Caller ID setup options available: AUTOTALK, CIDCW (Caller ID on Call Waiting), and AREA CODE. If the phone rings when AutoTalk is On, simply remove the remote from the base and the phone automatically answers the call. [. . . ] 2) Press v or w, or the number keypad to view the Phonebook locations. Each time w is pressed, Phonebook locations appear in ascending order. A name starting with a number or a mark, or <No Name> appears first. Each time v is pressed, Phonebook locations appear in descending order. PHONEBOOK 3) To end viewing your Phonebook, press /tSPEED (if you view the Phonebook during a call) or END. 20 21 MAKING CALLS USING THE PHONEBOOK FROM STANDBY MODE 1) When the phone is in the standby mode, press /tSPEED. 2) Press v or w to view the Phonebook locations (see "Viewing the Phonebook" on page 19). 4) To hang up, press END. SPEED DIALING If you have selected a speed dial memory location (10 locations: SPD1­ SPD0) when storing a phone number in the Phonebook dial location, you can use the speed dialing feature. 1) When the phone is in the standby mode, press and hold a number key (0 ­ 9) associated with the speed dial. 3) Press END to end the call. PHONEBOOK FROM TALK MODE 1) Press TALK/FLASH. 3) Press v or w to view the Phonebook locations (see "Viewing the Phonebook" on page 19). 5) To hang up, press END. EDITING 1) When the phone is in the standby mode, press /tSPEED. THE PHONEBOOK 2) Press v or w, or the number keypad to view the Phonebook locations (see "Viewing the Phonebook" on page 19). 22 23 CHAIN DIALING 3) When the Phonebook location to be edited appears, press SELECT/CH. 4) Follow the steps 3 to 7 under "Storing Phone Numbers, Names, Distinctive Rings and Speed Dial" starting on page 17 to complete the editing operation. You will hear a confirmation tone and "Done!" appears on the display. You can also store a group of numbers (up to 20 digits), that you need to enter once your call connects. Store the special number in the Phonebook location (refer to "Storing Phone Numbers, Names, Distinctive Rings and Speed Dial" on page 17). Once you have called your bank, and when you are prompted to enter the account number, press /tSPEED and use v or w to select the number in the Phonebook location, then press SELECT/CH. PHONEBOOK DELETING THE STORED DATA 1) Select the Phonebook location to be deleted. "Deleted!" appears in the display. 24 25 ONE TOUCH DIALING FOR ONE NUMBER You can store one number that you dial often in the One Touch Dial. The one touch dialing allows you to dial that number with one key press. MAKING CALLS WITH THE ONE TOUCH DIAL When the phone is in the standby mode, press and hold /tSPEED. The number in the one touch location is dialed. STORING THE ONE TOUCH DIAL PHONEBOOK 1) When the phone is in the standby mode, press /tSPEED. 4) Store the name, phone number, and distinctive ring by following the steps 3 to 6 under "Storing Phone Numbers, Names, Distinctive Rings and Speed Dial" on page 17. You will hear a confirmation tone and "Done!" appears on the display. DELETING THE ONE TOUCH DIAL 1) When the phone is in the standby mode, press /tSPEED. "Deleted!" appears in the display. 26 27 CALLER ID TIPS If you answer a call before the Caller ID message is received (Example: before the second ring), the Caller ID message will not appear. When a call is received via a telephone company that does not offer Caller ID service, the caller´s phone number and name do not appear. [. . . ] Soon after hearing this warning, you should recharge the remote pack. MORE 39 38 GENERAL INFORMATION CAUTION Use the specified battery pack (63421-01). Do not remove or damage the battery casing. BATTERY REPLACEMENT AND HANDLING When the operating time becomes short, even after a battery is recharged, please replace the battery. WARNING: To avoid the risk of personal injury or property damage from fire or electrical shock, only use the battery model and adapter model specifically designated for this product. POWER FAILURE During the period that the power is off, you will not be able to make or receive calls with the telephone. The phone complies with FCC Parts 15 and 68. [. . . ]