User manual PLANTRONICS CA10CD QUICK START GUIDE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PLANTRONICS CA10CD. We hope that this PLANTRONICS CA10CD user guide will be useful to you.


PLANTRONICS CA10CD QUICK START GUIDE: Download the complete user guide (261 Ko)

You may also download the following manuals related to this product:

   PLANTRONICS CA10CD QUICK START GUIDES (495 ko)

Manual abstract: user guide PLANTRONICS CA10CDQUICK START GUIDE

Detailed instructions for use are in the User's Guide.

[. . . ] 4. 4 Adjust the volume from your headset by using the Listen Volume Control. The user must initially set the Transmit Level Switch and the Configuration Switch to the optimum settings. These switches determine how the adapter interacts with a particular system. 4. 5 The CA10CD Transmit Level Switch provides three levels: "1" (high or carbon), "2" (medium or electret), and "3" (low or dynamic). [. . . ] Setting the Channel Selection Wheels to 01-40 chooses fixed channel selection mode. The left wheel is the 10's digit, and the right wheel is the units digit, looking at the Base from the back. Selecting channel 01 sets the Base to transmit on 902. 8MHz and the Remote to transmit on 925. 3 MHz. Selecting the next higher channel results in a transmission increment of . 05 MHz. Therefore, selecting channel 02 sets the Base to transmit on 902. 85 MHz and the Remote to transmit on 925. 35 MHz. Selecting channel 40 sets the Base to transmit on 904. 75 MHz and the Remote to transmit on 927. 25 MHz. The Channel button on the Remote is disabled when the system is in fixed channel selection mode. Fixed channel selection mode is provided to permit planned dedicated channels for individual users in an environment with many users. To select a particular channel, first turn off power to the Remote unit. With the Remote removed from the base, change the Channel Selection Wheels on the back of the Base to the desired channel. When power is reapplied to the Remote, the newly selected channel will be used. Changing the Channel Selection Wheels while the Remote is energized will not result in the system changing channels until the next time the Remote is placed in the base with the power off. TROUBLESHOOTING I cannot hear I Make sure your Remote Battery Pack is securely seated in the Charging Well and/or fully charged. I Check that all cords are correctly connected and firmly in place as per the connection diagram. I Return the Remote to the Base Unit charger for 5 seconds to reestablish a communication link. I Make sure that the microphone boom on your headset is adjusted properly, as specified in the Headset User's Guide. I hear a buzz or hum I Try locating your Base Unit in different positions and make sure no objects obstruct the Remote or Base Unit. I Locate the Remote and Base Units away from electronic equipment or other radio frequency devices. I hear a squeal in the headset I Be sure the headset plug is pushed all the way into the headset jack on the Remote. I Reduce the Talk Volume (control located on the side of the Base) I If squeal occurs with the talk volume at minimum, move the Transmit Level Switch (located on the back of the base) from position 1 to position 2, or from position 2 to position 3, and readjust the Talk Volume Control. I If you have multiple CA10CD Base units, move them as far as possible from each other. I can hear other cordless device users I Press the Channel Button until you get a clear signal. I If others are using a CA10CD Amplifier in your immediate vicinity, call the Technical Assistance Center at Plantronics (800-544-4660) for instructions on adjusting the channel control settings. [. . . ] Implied warranties, including those of merchantability, fitness for a particular purpose and non infringement shall (a) have no duration greater than one year from the date of purchase, (b) terminate automatically at the end of that period, and (c) to the extent permitted by law, be excluded. Consequential and incidental damages, including without limitation, loss of property and those arising from breach of any express or implied warranty, are not the responsibility of Plantronics, and to the extent permitted by law, are excluded. Some states do not allow exclusion or limitation of incidental or consequential damages, so the above exclusion may not apply to you. AC Adapter Battery Charger 45669-01 SSP2245-01 345 Encinal Street Santa Cruz, California 95060 (800) 544-4660 www. plantronics. com Leather Case for Remote Unit with Belt Clip 60077-01 Neck Strap (Lanyard) 42157-01 Allows Remote to be worn around your neck Protect your Remote Unit and secure battery pack to Remote Unit Console Adapter Cable 68331-01 Headset Adapter Cable 43446-02 How do you get service?contact Plantronics at (800) 544-4660 and in Canada call (800) 540-8363. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE PLANTRONICS CA10CD




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PLANTRONICS CA10CD will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.