User manual PLANTRONICS AVAYA AWH75N DECLARATION OF CONFORMITY

[. . . ] If the CD-ROM doesn't automatically play, double-click the "My Computer" icon on the Windows desktop and double-click the CD-ROM. * For use with a 4-wire 2-line wall outlet (RJ14C) a 2-line, 3-way jack adapter is required. Like most landline phones, DSL users will need a DSL filter. iv 1 Completed System Calisto Calisto Pro Series Charging the Handset and Headset To charge headset, press firmly onto the charging connector until click is heard and headset light turns solid red. Handset Charging time: 16 hours minimum before first time use, or until the full battery icon is displayed in the top right hand corner of screen. The headset indicator should light up solid red while charging, and solid blue when fully charged in the base. Charging time: 3 hours minimum before first time use, or until the headset indicator turns solid blue. Headset Installing the Handset Battery To remove battery door, press firmly Using the Headset and Handset Using Your Headset for the First Time The headset automatically powers on when it is charging. [. . . ] 4 ascending beeps 4 descending beeps Headset is powered on Headset is powered off 1. Plug the battery pack connector into the white jack inside the handset. Slide the battery cover onto the handset and place the handset onto the base to charge it. The screen may take up to 10 minutes to show charge indicator. 2 3 Wearing the Headset 1. To switch from one ear to the other, flip the ear loop to the side, and twist around as shown. Placing Calls The headset must remain within 33 feet of the handset in order to place or receive a call on the headset. Calls can also be placed from the headset or speakerphone when the handset is in the charging base. For your convenience, the headset comes pre-paired with the Calisto phone. To place a call using: Handset Do the following: Dial the number and then press the Talk key. Point the mouthpiece toward your mouth. Speakerphone Headset key. Press the Headset button on the headset for under 1 second to switch to the headset. When headset is connected to a call* an icon is displayed on the screen. * There may be a 1­ 2 second delay between pressing the button and hearing sound in the headset. Receiving Calls Wearing the Handset To wear the handset using the waist clip, slide it between your belt or waistband and your pants. When the mobile phone detects the headset, select Calisto PLT from list of found devices. When mobile phone prompts you for a passcode, enter "0000" on the mobile keypad as shown. Receiving Calls When your mobile phone rings, press the Headset button on the headset for under 1 second or until you hear a single high beep to answer the call. Some mobile phones require you to accept the headset connection each time you receive a call on the headset. Ending Calls Press headset button to end the call, or end the call using your mobile phone. If you are using the headset, press the Headset button inward for under 1 second to end call. Your headset is now paired with your mobile phone and works within 33 feet of your mobile phone. tIP When using the headset with your mobile phone for the first time, it is recommended that you do it out of range from the Calisto handset and base. Once you have successfully received and answered calls with your mobile phone, bring the headset back within range to answer both landline and mobile calls. 8 9 Answering a Second Incoming Landline, VoIP or Mobile Call While you are on a landline or mobile call, the headset emits 3 beeps to inform you that there is a second incoming landline (this requires subscription to Call Waiting from your phone service provider) or mobile call. Since the Calisto phone does not control your mobile phone, you cannot toggle back and forth between landline (or VoIP) and mobile calls. In order to switch from a landline call to an incoming mobile call or from a mobile call to an incoming landline call, you will have to end the first call. If you are on this type of call: Landline (or VoIP) And this type of call comes in: Landline (or VoIP) Do this: key on phone Press either or Answer soft key on screen to answer incoming call. Landline (or VoIP) Mobile Press Headset button once to hang up landline call and a second time to answer incoming mobile call. Press Headset button once to hang up mobile call and a second time to answer incoming landline call. Getting Help Calisto: See the online User Guide at www. plantronics. com/calisto Calisto Pro Series: See the comprehensive User Guide included on the software CD or online at www. plantronics. com/calistopro For additional assistance, reference the QuickTips card under the charging base or call 1-888-237-2557 to speak to a Calisto support specialist. Outside the USA, please call 831-458-7700. Troubleshooting Handset not working Make sure battery is installed properly and fully charged. It is recommended to charge the unit for a minimum of 16 hours the first time. [. . . ] is displayed on screen, make sure headset is fully charged, If powered on and within 33 feet of handset. In charging base, light turns from red to blue once headset is fully charged. is not displayed on screen, press headset button for under If 1 second. If issue continues, see comprehensive User Guide for instructions on how to re-pair headset with Calisto handset. [. . . ]