User manual PLANTRONICS .AUDIO 995

[. . . ] 6 Indicator Lights. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Product Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Note Some applications, such as iTunes, must be the active window in order for play, pause and skip to work properly. EN 5 Operating Systems Configuration Your . Audio 995 headset works with any USBcompliant computer. The headset will automatically be set as the active audio device once the wireless USB Adapter is plugged in. Below are details on how to set the audio device for the most popular operating systems. Note On-ear controls may not function properly with operating systerms earlier than Windows XP. Windows XP® 1 2 3 4 5 Go to Start > Control Panel > Sounds and Audio Devices. On the Audio tab, select "Plantronics Wireless Audio" as the Sound Playback and Sound Recording device. On the Voice tab, select the "Plantronics Wireless Audio" as the Voice Playback and Voice Recording device. Select OK. 6 Operating Systems Configuration Windows Vista Mac® oS X 1 2 3 4 5 6 Go to Start > Control Panel > Classic View > Sounds. On the Playback tab, select the "Plantronics Wireless Audio" as the Sound Playback device. Select Properties, and on the Levels tab, adjust the Volume Slider as necessary. On the Recording tab, select the "Plantronics Wireless Audio" headset as the Sound Recording device. Select Properties, and on the Levels tab, adjust the Volume Slider as necessary. On the Output tab, select the "Plantronics Wireless Audio" headset as the Sound Output device. On the Input tab, select the "Plantronics Wireless Audio" headset as the Sound Input device. Select OK EN 7 Indicator Lights--Headset and Wireless USB Adapter Status Power On/Off Indicator On: Steady blue glow Off: Steady red glow, then off Flashing blue Solid red until charging complete Solid blue glow Out of Range Charging Connected to Adapter Standby/Battery Save Mode Intermittent breathing or pulsing blue (Sleep)/Out of Range glow Pairing Headset and adapter will rapidly flash blue when in pairing mode 8 Product Specifications Technology Full range stereo Wearing style Cable length Ear cushion material Ear cushion design Noise cancelling mic Microphone boom Mic mute Volume mute/controls Digital wireless Stereo headset Over the head Wireless Non-allergenic Closed ear Yes Rotates/bends FastMic mute On ear EN Wireless technolgy 2. 4GHz Speaker driver size 40mm diameter Speaker frequency 20Hz--20kHz response Microphone frequency response Wireless range 100 Hz--10kHz Up to 40 feet 9 Troubleshooting The headset did not connect Ensure the headset is fully charged and powered on. to the wireless USB adapter Ensure that the wireless USB adapter is plugged into a powered USB on first use. [. . . ] However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception which can be determined by turning the radio or television off and on, the user is encouraged to try to correct interference by one or more of the following measures: 1. It is possible that electronic shock discharge may affect the function of the headset. [. . . ]