User manual PLANAR PX191 Product Manual
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PLANAR PX191. We hope that this PLANAR PX191 user guide will be useful to you.
Manual abstract: user guide PLANAR PX191Product Manual
Detailed instructions for use are in the User's Guide.
[. . . ] 2
Installation
Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Connecting the Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
User Controls
Front Panel Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 How to Use the OSD Menus. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] To mount the monitor on a swing arm or other mounting fixture, follow the instruction included with the mounting fixture to be used. Slots 100mm
VESA Mounting Interface
100mm
Warning!
Please must select the proper screws!The depth from plastic back cover to the bottom of the screw hole is 8mm. The spec is M4 screw.
English
6
Connecting the Display (Figure 8. 1)
To setup this display, please refer to the following figure and procedures. Connect the DC power cord to the power connector; plug one end of the AC power cord into the power adapter, and then the other end into an electrical outlet(u). Connect the VGA signal cable from display VGA input connector to the 15-pin connector of your host computer and tighten the screws(v). For the PC with DVI digital output: Connect the DVI signal cable to the connector of the display card in your computer; connect the other side to the DVI-D input port of your display. Turn on your computer and display.
Note:
To ensure the LCD display can work well with your computer, please configure the display mode of your graphic card to make it less than or equal to 1280 x 1024 resolution and make sure timing of the display mode is compatible with the LCD display. We have listed the Compatibility Modes of this LCD display in appendices for your reference. English
7
Figure 8. 1
Power Adapter & Power Cord
VGA Cable
DVI-D Cable
English
8
User Controls
Front Panel Controls
No. / Icon MENU SELECT/AUTO Control
Menu button Select/Auto
Function
To pop up the OSD menus.
3
Select- To select the adjustment items from OSD menus. Auto-To activate the Auto Adjustment function to obtain an optimum image. Brightness Minus/Minus 1. Decreases the brightness of the display image. Switches on/off the power of the LCD display.
4
Power LED
Power Switch
English
10
How to Use the OSD Menus
1. Press the M button to pop up the on-screen menu and to select between the four Main Menus. Adjust the value of the adjustment items by pressing the - or + button. Once you dont operate the OSD menus after a pre-set time, the OSD menus will automatically disappear.
English
11
On-Screen Display Menus
First OSD Menu:
4 Auto-Adjustment
Chooses this function to obtain an optimum image.
4 Contrast
Adjusts the contrast of the display image.
4 Brightness
Adjusts the brightness of the display image.
4 Horizontal Position
Changes the horizontal position of the image.
4 Vertical Position
Changes the vertical position of the image.
4 Clock
Changes the display data frequency to match the frequency of your graphic card. When you are experiencing vertical flickering bar, use this function to make an adjustment.
4 Phase
Synchronizes the signal timing of the display to that of the graphic card. When you are experiencing unstable to flickering image, use this function to make an adjustment.
English
12
Second OSD Menu:
4 Display Mode
Selects this function to demonstrate the display resolution, vertical refresh, and horizontal scan of the current mode.
4 OSD Off-Time
Adjusts the time period for OSD menu disappear.
4 Language
Chooses the language you need.
4 Sharpness
Adjust the sharpness of the image.
4 Reset
Returns the display parameters of the current mode to its factory default settings.
English
13
Third OSD Menu:
4 Input Select
It allows you to select the type of signal.
English
14
Fourth OSD Menu:
4 Color Setting
Adjusts the color temperature.
4 Color Adjustment-Red
It allows you to adjust the red color of the display.
4 Color Adjustment-Green 4 Color Adjustment-Blue
It allows you to adjust the green color of the display.
It allows you to adjust the blue color of the display.
English
15
Appendices
Troubleshooting
If you are experiencing trouble with the LCD display, refer to the follows. If the problem persists, please contact your local dealer or our service center. Problem: No image appears on screen.
4 Check that all the I/O and power connectors are correctly and
well connected as described in the Installation section. [. . . ] Run the Start_Pivot program and select the pivot option to install portrait displays software on your computer. To Change orientation, right click anywhere on the desktop and select Rotate 0, 90, 180, or 270 from the menu. Web pages, E-mail, reports and letters are best viewed in portrait orientation. They can be viewed and edited without the need to scroll the page.
English
20
Planar Systems, Inc. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE PLANAR PX191
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PLANAR PX191 will begin.