User manual PLANAR PT1701M Product Manual
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PLANAR PT1701M. We hope that this PLANAR PT1701M user guide will be useful to you.
Manual abstract: user guide PLANAR PT1701MProduct Manual
Detailed instructions for use are in the User's Guide.
[. . . ] Other brand or product names are trademarks of their respective holders.
Table of Contents
Usage Notice Precautions . .
20 21 22 23 24 25
Usage Notice
WARNING -To prevent the risk of fire or shock hazards, do not
expose this product to rain or moisture.
WARNING -Please do not open or disassemble the product as this
may cause electric shock.
Safety and Use Precautions
Follow all warnings, precautions and maintenance as recommended in this User's Guide to maximize the life of your unit. Use only a dry soft cloth or clean room wiper when cleaning the LCD panel surface. Disconnect the power plug from AC outlet if the product is not used for a long period of time. [. . . ] Connect the VGA signal cable from the display's VGA input connector to the 15-pin connector of your host computer and tighten the screws (11. 1 4. Connect the Audio-In cable from the audio input port of your display to the For the PT1700M and the PT1701M, connect the RS-232 cable from the RS-232 port of your display to the RS-232 port of your computer (11. 1 USB port of your display to the USB port of your computer (11. 2 ). For the PT1700MU and the PT1701MU, connect the USB cable from the
Notice!
To ensure the LCD display works well with your computer, please configure the display mode of your graphic card to make it less than or equal to 1280 x 1024 resolution and make sure the timing of the display mode is compatible with the LCD display. We have listed the "Video Modes" of this LCD display in the appendix for your reference.
11
Figure 11. 1
Audio-In Cable VGA Cable RS-232 Cable
Power Adapter & Power Cord
12
Figure 11. 2
Audio-In Cable
VGA Cable
USB Cable
Power Adapter & Power Cord
13
User Controls
Front Panel Controls
AUTO MENU SELECT
No. / Icon
MENU
Control
Menu button
Function
Display the OSD menus Select- To select the adjustment items from OSD menus. Auto- To activate the "Auto Adjustment" function to obtain an optimum image. Amber indicates the display is in power-saving mode.
SELECT/AUTO Select/Auto
3 4
Brightness Minus/ Minus Brightness Plus/ Plus Power Switch Power LED
14
How to Use the OSD Menus
1. Press the "Menu" button to pop up the on-screen menu and to select between the four Main Menus. Choose the adjustment items by pressing the "Select/Auto" button. Adjust the value of the adjustment items by pressing the "3" or "4" button. The OSD menu will automatically close, if you have left it idle for a pre-set time.
15
On-Screen Display Menus
Main OSD Menu: Main Menu Page 1 Auto-Adjustment Contrast Brightness Horizontal Position Vertical Position Clock Phase No Yes
4 Auto-Adjustment
Choose this function to obtain an optimum image.
4 Contrast
Adjust the contrast of the display image.
4 Brightness
Adjusts the brightness of the image.
4 Horizontal Position
Changes the horizontal position of the image.
4 Vertical Position
Changes the vertical position of the image.
4 Clock
Changes the display data frequency to match the frequency of your graphic card. When you are experiencing vertical flickering bar, use this function to make an adjustment.
4 Phase
Synchronizes the signal timing of the display to that of the graphic card. When you are experiencing vertical flickering image, use this function to make an adjustment.
16
Second OSD-Menu:
Main Menu Page 2 Display Mode OSD Off-Time Language Sha r pne s s Reset
1280* 1024 FH: 80 kHz (+) + FV: 75 Hz (+) +
4 Display Mode
Selects this function to demonstrate the display resolution, vertical refresh, and horizontal scan of the current mode.
4 OSD Off-Time
Adjusts the time period for OSD menu to disappear.
4 Language
Choose the language you need.
4 Sharpness
Adjust the sharpness of the image.
4 Reset
Returns the display parameters of the current mode to its factory default settings.
17
Third OSD-Menu:
Vo l u m e Mute
Main Menu Page 3
-
0
20
40
+
4 Volume
It allows toy control the volume sound.
4 Mute
It allows you to disable the sound immediately.
18
Fourth OSD-Menu:
Color Color Color Color
Main Menu Page 4 Setting Adjustment-Red Adjustment-Green Adjustment-Blue
9300K 6500K
Preset Custom
4 Color Setting
Adjusts the color temperature.
4 Color Adjustment-Red
It allows you to adjust the red color of the display.
4 Color Adjustment-Green
It allows you to adjust the green color of the display.
4 Color Adjustment-Blue
It allows you to adjust the blue color of the display.
19
Appendix
Troubleshooting
If you are experiencing trouble with the LCD display, refer to the following. If the problem persists, please contact your local dealer or our service center. Problem: No image appears on screen.
4 Check that all the I/O and power connectors are correctly and well connected
as described in the " Installation " section.
4 Make sure the pins of the connectors are not crooked or broken.
Problem: Partial image or incorrectly displayed the image.
4 Check to see if the resolution of your computer is higher than that of the LCD
display.
4 Reconfigure the resolution of your computer to make it less than or equal to
1280 x 1024. Problem: Image has flickering vertical line bars.
4 Use " Clock " to make an adjustment. 4 Check and reconfigure the display mode of the vertical refresh rate of your graphic
card to make it compatible with the LCD display. Problem: Image is unstable and flickering
4 Use " Phase " to make an adjustment.
Problem: Image is scrolling
4 Check and make sure the VGA signal cable (or adapter) is well connected. 4 Check and reconfigure the display mode of the vertical refresh rate of your graphic
card to make it compatible with the LCD display. Problem: Vague image (characters and graphics)
4 Use " Clock " to make an adjustment. If this problem still exists, use "Phase" to
make an adjustment.
20
Warning Signal
If you see warning messages on your LCD screen, this means that the LCD display cannot receive a clean signal from the computer graphics card. [. . . ] If you have a USB cable connection disconnect the cable from the monitor or the PC before installing the driver. If the touch screen driver does not automatically load, restart the computer operating system. Please read "Readme. txt" located in the unzipped file folder for additional information and assistance.
27
Linux Driver Installation for PT1701MU: Capacitive Touch Screen with USB Connection
Touch driver information is located on the enclosed CD-ROM. Supported platforms include: Red Hat R Linux 8. 0, Red Hat R Linux 9. 0, and SuSE R Linux 8. 2 and SuSE R Linux 9. 0 on Pentium R -compatible CPUs. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE PLANAR PT1701M
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PLANAR PT1701M will begin.