User manual PLANAR PT1700M Product Manual

[. . . ] Other brand or product names are trademarks of their respective holders. Table of Contents Usage Notice Precautions . . 20 21 22 23 24 25 Usage Notice WARNING -To prevent the risk of fire or shock hazards, do not expose this product to rain or moisture. WARNING -Please do not open or disassemble the product as this may cause electric shock. Safety and Use Precautions Follow all warnings, precautions and maintenance as recommended in this User's Guide to maximize the life of your unit. Use only a dry soft cloth or clean room wiper when cleaning the LCD panel surface. Disconnect the power plug from AC outlet if the product is not used for a long period of time. [. . . ] Connect the VGA signal cable from the display's VGA input connector to the 15-pin connector of your host computer and tighten the screws (11. 1 4. Connect the Audio-In cable from the audio input port of your display to the For the PT1700M and the PT1701M, connect the RS-232 cable from the RS-232 port of your display to the RS-232 port of your computer (11. 1 USB port of your display to the USB port of your computer (11. 2 ). For the PT1700MU and the PT1701MU, connect the USB cable from the Notice! To ensure the LCD display works well with your computer, please configure the display mode of your graphic card to make it less than or equal to 1280 x 1024 resolution and make sure the timing of the display mode is compatible with the LCD display. We have listed the "Video Modes" of this LCD display in the appendix for your reference. 11 Figure 11. 1 Audio-In Cable VGA Cable RS-232 Cable Power Adapter & Power Cord 12 Figure 11. 2 Audio-In Cable VGA Cable USB Cable Power Adapter & Power Cord 13 User Controls Front Panel Controls AUTO MENU SELECT No. / Icon MENU Control Menu button Function Display the OSD menus Select- To select the adjustment items from OSD menus. Auto- To activate the "Auto Adjustment" function to obtain an optimum image. Amber indicates the display is in power-saving mode. SELECT/AUTO Select/Auto 3 4 Brightness Minus/ Minus Brightness Plus/ Plus Power Switch Power LED 14 How to Use the OSD Menus 1. Press the "Menu" button to pop up the on-screen menu and to select between the four Main Menus. Choose the adjustment items by pressing the "Select/Auto" button. Adjust the value of the adjustment items by pressing the "3" or "4" button. The OSD menu will automatically close, if you have left it idle for a pre-set time. 15 On-Screen Display Menus Main OSD Menu: Main Menu Page 1 Auto-Adjustment Contrast Brightness Horizontal Position Vertical Position Clock Phase No Yes 4 Auto-Adjustment Choose this function to obtain an optimum image. 4 Contrast Adjust the contrast of the display image. 4 Brightness Adjusts the brightness of the image. 4 Horizontal Position Changes the horizontal position of the image. 4 Vertical Position Changes the vertical position of the image. 4 Clock Changes the display data frequency to match the frequency of your graphic card. When you are experiencing vertical flickering bar, use this function to make an adjustment. 4 Phase Synchronizes the signal timing of the display to that of the graphic card. When you are experiencing vertical flickering image, use this function to make an adjustment. 16 Second OSD-Menu: Main Menu Page 2 Display Mode OSD Off-Time Language Sha r pne s s Reset 1280* 1024 FH: 80 kHz (+) + FV: 75 Hz (+) + 4 Display Mode Selects this function to demonstrate the display resolution, vertical refresh, and horizontal scan of the current mode. 4 OSD Off-Time Adjusts the time period for OSD menu to disappear. 4 Language Choose the language you need. 4 Sharpness Adjust the sharpness of the image. 4 Reset Returns the display parameters of the current mode to its factory default settings. 17 Third OSD-Menu: Vo l u m e Mute Main Menu Page 3 - 0 20 40 + 4 Volume It allows toy control the volume sound. 4 Mute It allows you to disable the sound immediately. 18 Fourth OSD-Menu: Color Color Color Color Main Menu Page 4 Setting Adjustment-Red Adjustment-Green Adjustment-Blue 9300K 6500K Preset Custom 4 Color Setting Adjusts the color temperature. 4 Color Adjustment-Red It allows you to adjust the red color of the display. 4 Color Adjustment-Green It allows you to adjust the green color of the display. 4 Color Adjustment-Blue It allows you to adjust the blue color of the display. 19 Appendix Troubleshooting If you are experiencing trouble with the LCD display, refer to the following. If the problem persists, please contact your local dealer or our service center. Problem: No image appears on screen. 4 Check that all the I/O and power connectors are correctly and well connected as described in the " Installation " section. 4 Make sure the pins of the connectors are not crooked or broken. Problem: Partial image or incorrectly displayed the image. 4 Check to see if the resolution of your computer is higher than that of the LCD display. 4 Reconfigure the resolution of your computer to make it less than or equal to 1280 x 1024. Problem: Image has flickering vertical line bars. 4 Use " Clock " to make an adjustment. 4 Check and reconfigure the display mode of the vertical refresh rate of your graphic card to make it compatible with the LCD display. Problem: Image is unstable and flickering 4 Use " Phase " to make an adjustment. Problem: Image is scrolling 4 Check and make sure the VGA signal cable (or adapter) is well connected. 4 Check and reconfigure the display mode of the vertical refresh rate of your graphic card to make it compatible with the LCD display. Problem: Vague image (characters and graphics) 4 Use " Clock " to make an adjustment. If this problem still exists, use "Phase" to make an adjustment. 20 Warning Signal If you see warning messages on your LCD screen, this means that the LCD display cannot receive a clean signal from the computer graphics card. [. . . ] If you have a USB cable connection disconnect the cable from the monitor or the PC before installing the driver. If the touch screen driver does not automatically load, restart the computer operating system. Please read "Readme. txt" located in the unzipped file folder for additional information and assistance. 27 Linux Driver Installation for PT1701MU: Capacitive Touch Screen with USB Connection Touch driver information is located on the enclosed CD-ROM. Supported platforms include: Red Hat R Linux 8. 0, Red Hat R Linux 9. 0, and SuSE R Linux 8. 2 and SuSE R Linux 9. 0 on Pentium R -compatible CPUs. [. . . ]