User manual PLANAR PT1501M Product Manual

[. . . ] Features include: Direct analog signal input Active matrix TFT LCD technology 1024 x 768 XGA resolution 15" viewable display area 31. 5 ~ 60 kHz horizontal scan 56 ~ 75 Hz refresh rate Auto-adjustment function Multilingual OSD user controls VESA DPMS power saving Kensingston security lock slot 75 mm VESA mount Durable touchscreen 2 Touch Screen for PT1500M(U) Resistive for finger and pen interface Surface : Anti-glare treatment Interface : Serial (PT1500M), USB (PT1500MU) Durability : 1, 000, 000 activations at a single point Hardness of surface : 4H per ASTM D3363-92 Operating force : Stylus - <25 g (average) Finger - <50 g (average) Transmissivity : 85% + / - 2% (typical) Haze : 5% Clarity : 80% Driver : Windows 95/98/Me/NT/2000/XP, Linux 3 Touch Screen for PT1501M(U) Capacitive for finger interface Surface : Anti-glare treatment Interface : Serial (PT1501M), USB (PT1501MU) Durability : 225, 000, 000 touches in a single location Hardness : Cannot be scratched using any stylus with Mohs' rating of less than 6. 5 Transmissivity : up to 88% at 550 nm Driver : Windows 95/98/Me/NT/2000/XP, Linux MS HID compatible pointing device 4 Package Overview LCD Display Power Adapter Power Cord VGA Signal Cable Audio-In Cable RS-232 Serial Cable (for PT1500M, PT1501M) User's Guide Landing Strip USB Cable (for PT1500MU, PT1501MU) Touchscreen Driver Installation CD-ROM 5 Installation Product Overview Front View LCD Display Panel Controls Speakers Stand Rear View Connector Ports "A" (Inside the back cover) Connector Ports "B" 6 Connector Ports "A" DC Power-In VGA input Audio input Connector Ports "B" RS-232 (For PT1500M, PT1501M) Touch Function USB (For PT1500MU, PT1501MU) 7 Kensington Security Slot The monitor can be secured to your desk or any other fixed object with Kensington lock security products. The kensington lock is not included. Kensington Security Slot 8 VESA Mount your monitor This monitor conforms to the VESA Flat Panel Mounting Physical Mounting Interface Standard which defines a physical mounting interface for flat panel monitors, and corresponding standards for flat panel monitor mounting devices, such as wall and table arms. The VESA mounting interface is located on the back of your monitor. To mount the monitor on a swing arm or other mounting fixture, follow the instruction included with the mounting fixture to be used. Slots 75mm VESA Mounting Interface 75mm Note! Please select the proper screws! [. . . ] Auto- To activate the "Auto Adjustment" function to obtain an optimum image. Amber indicates the display is in power-saving mode. SELECT/AUTO Select/Auto 3 4 Brightness Minus/ Minus Brightness Plus/ Plus Power Switch Power LED 14 How to Use the OSD Menus 1. Press the "Menu" button to pop up the on-screen menu and to select between the four Main Menus. Choose the adjustment items by pressing the "Select/Auto" button. Adjust the value of the adjustment items by pressing the "3" or "4" button. The OSD menu will automatically close, if you have left it idle for a pre-set time. 15 On-Screen Display Menus Main OSD Menu: 4 Brightness Choose this function to adjust the brightness of the image. 4 Contrast Choose this function to adjust the contrast ofthe image. 4 LCD Adjustment Opens the LCD Adjustment sub-menu where you can adjust the Clock, Phase, Horizontal Position and Vertical Position parameters. 4 Color Temperature Opens the Color Temperature sub-menu where you can select the desired Color Temperature of the image. 4 ECO Mode Enables or disables the power savings mode. 4 Language Opens the Language sub-menu where you can select the desired language of the OSD. 4 Other Setup Opens the Other Setup sub-menu where you can adjust the Smooth, OSD Position, OSD Transparency, OSD Time Out, Volume and Mode Message parameters. 16 LCD Adjustment Sub-Menu: 4 Clock Minimizes any vertical bars or stripes visible on the screen. 4 Phase Minimizes any horizontal distortion and clears or sharpens the displayed characters. 4 H. Position Changes the vertical position of the image. 17 Other Setup Sub-Menu: 4 Smooth Adjusts the smoothness of the image. 4 OSD H. Position Changes the vertical position of the OSD. 4 OSD Transparency Changes the opaqueness of the OSD background. 4 OSD Time out Adjusts the amount of time the OSD menu will be displayed for after inactivity. 4 Volume Adjusts the sound volume. 4 Mode Message Enables or disables the display of information. 4 Reset Resets the display parameters back to its factory default settings. 18 Appendix Troubleshooting If you are experiencing trouble with the LCD display, refer to the following. If the problem persists, please contact your local dealer or our service center. Problem: No image appears on screen. 4 Check that all the I/O and power connectors are correctly and well connected as described in the " Installation " section. 4 Make sure the pins of the connectors are not crooked or broken. Problem: Partial image or incorrectly displayed the image. 4 Check to see if the resolution of your computer is higher than that of the LCD display. 4 Reconfigure the resolution of your computer to make it less than or equal to 1024 x 768. Problem: Image has flickering vertical line bars. 4 Use " Clock " to make an adjustment. 4 Check and reconfigure the display mode of the vertical refresh rate of your graphic card to make it compatible with the LCD display. Problem: Image is unstable and flickering 4 Use " Phase " to make an adjustment. Problem: Image is scrolling 4 Check and make sure the VGA signal cable (or adapter) is well connected. 4 Check and reconfigure the display mode of the vertical refresh rate of your graphic card to make it compatible with the LCD display. Problem: Vague image (characters and graphics) 4 Use " Clock " to make an adjustment. If this problem still exists, use "Phase" to make an adjustment. 19 Warning Signal If you see warning messages on your LCD screen, this means that the LCD display cannot receive a clean signal from the computer graphics card. Please check the cable connections or contact Planar for more information. 4 No Signal This message means that the LCD display has been powered on but it cannot receive any signal from the computer graphic card. Check all the power switches, power cables, and VGA signal cable. 4 Out of Range This message means that the signal of the computer graphic card is not compatible with the LCD display. [. . . ] If the touch screen driver does not automatically load, restart the computer operating system. Please read "Readme. txt" located in the unzipped file folder for additional information and assistance. Driver Installation for PT1501MU: Capacitive Touch Screen with USB Connection Touch driver information is located on the enclosed CD-ROM for the following operating systems: Microsoft Windows R XP, Windows 2000, Windows NT 4. 0, Windows Me, and Windows 9X. If you have a USB cable connection disconnect the cable from the monitor or the PC before installing the driver. [. . . ]