User manual PLANAR PE191M Product Manual

[. . . ] In a domestic environment, this product may cause radio interference in which case the user may be required to take adequate measures. Canadian Doc Notice For Class B Computing Devices This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the Radio Interference Regulation of the Canadian Department of Communications. "Le présent appareil numérique n'èmet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de la class B prescrites dans le Règlement sur le brouillage radioélectrique édicté par le ministère des Communications du Canada" ii Important Safety Instructions Please read the following instructions carefully. To clean the LCD Monitor screen, first, make sure the Monitor is in the power off mode. Stand away from the LCD Monitor and spray cleaning solution onto a rag. [. . . ] With the Monitor-Control icon selected, press the Function Enter button to display the submenu. Use the Function Enter buttons to select one of the following submenu options: 9 AUTO-ADJUST : Use the Adjustment Control buttons to apply the automatic monitor settings. H-POSITION: Use the Adjustment Control buttons to move the LCD monitor's display left or right on a horizontal plane. V- POSITION: Use the Adjustment Control buttons to move the LCD monitor's display up or down on a vertical plane. PHASE: Use the Adjustment Control buttons to adjust the focus and clarity of the display. CLOCK: Use the Adjustment Control buttons to adjust the display pixel number alignment. RESET: Pressing either of the Adjustment Control buttons resets H- Position, V-Position, Phase and Clock parameters. GRAPH. /TEXT: Press the Function Enter button to switch between the text and graphic options. PORT-SELECT: Press the Adjust buttons to change input between VGA port and DVI digital port (optional). EXIT: Pressing the Function Enter button exits the Monitor-Control submenu. OSD-Control Option The OSD-Control menu option lets you adjust the position of the OSD on the screen. With the OSD-Control icon selected (use the Function select buttons), press the Function Enter button to display the submenu. Use the Function Select buttons to select one of the following submenu options: OSD-H-POSITION: Use the Adjustment Control buttons to change the position of the OSD on a horizontal plane. 10 OSD-V- POSITION: Use the Adjustment Control buttons to change the position of the OSD on a vertical plane. OSD-TIMER : Use the Adjustment Control buttons to change the OSD display time. EXIT: Pressing the Function Enter button exits the OSD-Control submenu. Graphic-Control Option The Graphic-Control option lets you make adjustments that effect the contrast, brightness and color of the LCD monitor's display. With the Graphic-Control icon selected, press the Function Enter button to display the submenu. Use the Function Select buttons to select one of the following submenu options: CONTRAST: Use the Adjustment Control buttons to adjust the difference between the lightest and darkest areas of the LCD monitor's display screen. BRIGHTNESS: Use the Adjustment Control buttons to adjust the light level on the LCD monitor's display screen. COLOR: Use either of the Adjustment Control buttons to select the LCD monitor's color display. The 9300 and 6500 options let you set the Color Temperature to CIE coordinates 9300° or 6500° respectively. Selecting the user option lets you make individual adjustments to the R, G and B items. R, G and B: Use these submenu items to make individual adjustments to the Red Blue Green (RGB) gain for the color temperature Before adjusting these fields, you must select the User option in the Color submenu. AUTO-LEVEL: To adjust automatically to perfect the white balance display. 11 RESET: Pressing either of the Adjustment Control buttons resets Contrast, Brightness and Color parameters. [. . . ] Press the upper Function Control button (refer to Chapter 2) once and then press either the upper or lower Adjustment Control button several times. If there is still no display, press the other Adjustment Control button several times. If step 2 doesn't work, connect your PC system to another external CRT. If your PC System functions properly with a CRT Monitor but it does not function with the LCD Monitor, and the LCD Monitor's power LED is blinking, the output timing of the PC's VGA card may be out of the LCD's synchronous range. [. . . ]