User manual PLANAR LC1502R

[. . . ] LC1502R USER'S MANUAL www. planar. com 2 Table of Contents Usage Notice Safety and Use Precautions . . 27 3 Usage Notice Warning To prevent the risk of fire or shock hazards, do not directly expose this product to rain or moisture. Please do not open or disassemble the product as this may cause electric shock. Warning - Safety and Use Precautions Follow all warnings, precautions and maintenance as recommended in this User's Manual to maximize the life of your monitor. · Turn off the product before cleaning. · Use only a dry soft cloth or clean room wiper when cleaning the LCD panel surface. [. . . ] FCC Certification FCC Part 15, Subpart B, Class B - Conducted and Radiated Tests CE Certification Emission EN 55022:1998+A1:2000+A2:2003; Class B EN61000-3-2:2000, Class D EN61000-3-3:1995+A1:2001 Immunity (EN 55024:1998+A1:2001) IEC 61000-4-2: 2001 IEC 61000-4-3: 2002 IEC 61000-4-4: 1995+A1:200+A2:2001 IEC 61000-4-5: 2001 IEC 61000-4-6: 2001 IEC 61000-4-8: 2001 IEC 61000-4-11: 2001 C. UL/CUL Certification TUV Certification Electrostatic discharge immunity test Radiated, radio-frequency, electromagnetic field immunity test Electrical fast transient/ burst immunity test Surge immunity test Immunity to conducted disturbances, induced by radio-frequency fields Power frequency magnetic field immunity test Voltage dips, short interruptions and voltage variations immunity tests Conducted & Radiated Test Harmonic Current Emissions Voltage Fluctuations and Flicker 20 Available Options Power Supply and AC Power Cord The LC1502R requires a 12VDC power input. Many users will have the required 12VDC available in their existing system. Alternatively, a power supply that is appropriately rated for the LC1502R is available from Planar. The supply is available with the AC power cord configured with either a European plug or a US plug. 12V Power Supply Kit, Euro type 12V Power Supply Kit, US type Input voltage Output voltage Rated Output Current Case Dimensions DC output cord length AC input power cord length 997-2825-xx 997-2826-xx 90-265 VAC, 47-63 Hz 12 VDC 6. 67A max 129 x 77 x 40 mm 1. 8 meters 1. 8 meters Power Adapter Power Cord 21 Cooling Kit For outdoor applications, a cooling kit may be desired to prevent excessive heating of the LCD display. In direct sunlight, the front surface of the display (the LCD cell) may reach temperatures well above the ambient temperature. Possible effects of extreme surface temperatures include: · LCD polarizer damage (permanent degraded image) · LCD fluid clearing (display unreadable) · Latent image (image burn-in visible) · Flicker (image jitter) · Localized non-uniformity (permanent spotty appearance). The cooling kit consists of a rear-mounted housing containing three fans and a front-mounted baffle that channels the air flow across the display surface. The fans' speed is governed by a temperature sensor adjacent to the photo sensor that is mounted on the front of the monitor. At temperatures above 30°C the fans will turn on at low speed and reach maximum speed at 40°C, thus minimizing the effects of sun loading and high temperatures. The total fan kit power consumption is approximately 3. 6 watts with fans at max speed. Fan power is derived from the 12V input (4-pin DIN connector. ) All cooling kit version monitors are shipped with the cooling kit pre-installed. Model LC1502R-C Planar Part Number 997-2823-xx Description LC1502R with cooling kit 22 Touch Screens The LC1502R is available with two different types of touch screen technology: near field imaging (NFI) and capacitive. Both come pre-installed; the touch screen itself is mounted to the front of the monitor and the touch screen controller module is mounted on the back. NFI technology utilizes a thick glass substrate that provides "vandal-proof" protection. Capacitive technology is more rugged than resistive, and is usually the touch screen of choice for heavy use, unattended environments. Contact Planar for additional details or other custom possibilities. Model LC1502RTC LC1502RTN Planar Part Number 997-2817-xx 997-2824-xx Description LC1502R with capacitive touch screen LC1502R with NFI touch screen and cooling kit NFI Touch Screen LC1502R with NFI Touch Screen and Cooling Kit The LC1502R with NFI touch screen and cooling kit ­ model LC1502RTN-C is designed to be embedded into kiosks installed in outdoor unsupervised environments. It includes a NFI "vandalproof" touch screen, neoprene weather seals, and a LCD surface cooling kit. The mounting bracket, bolted to each side of the unit, hooks onto the touch screen bezel, houses the touch screen and the seals which absorb shock and virtually eliminates the ingress of liquids. The monitor may easily be removed from the touch bezel for cleaning and maintenance. 23 Set up 1. Refer to Planar mechanical outline drawing 076-0596-xx for the recommended mounting pattern for this display. [. . . ] Slight brightness nonuniformity is normal. Mechanical Outline See mechanical outline drawing on www. planar. com/support 27 Description of Warranty Seller warrants that the Goods will conform to published specifications and be free from defects in material for 12 months from delivery. To the extent that Goods incorporate third-party-owned software, Seller shall pass on Seller's licensor's warranty to Buyer subject to the terms and conditions of Seller's license. Warranty repairs shall be warranted for the remainder of the original warranty period. Buyer shall report defect claims in writing to Seller immediately upon discovery, and in any event, within the warranty period. [. . . ]