User manual PLANAR LA1950RTR

[. . . ] For more information, contact the Electronic Industries Alliance at WWW. EIAE. ORG. For lamp specific disposal information check WWW. LAMPRECYCLE. ORG. Table of Contents Usage Notice Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Introduction About LA1950 Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Touch Screen for LA1950RTR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The distance between the back cover surface and the bottom of the screw hole is 8 mm. Please use four M4 screws diameter with proper length to mount your monitor. Please note: the mounting stand must be able to support at least 13. 2 lbs (6Kg). Connecting the Display (Figure 10. 1) To setup this display, please refer to the following figure and procedures. 1. Connect the DC adapter to the power connector on the monitor and the other end into an electrical outlet (10. 1). Connect the D-SUB cable from the display's VGA input connector to the D-SUB connector of your host computer and tighten the screws (10. 1). Connect the RS-232 or USB cable from the RS-232 or USB port of your display to the RS-232 port (10. 1) or USB port (10. 1) of your computer. Refer to the "Touch Screen Driver Installation" section on page 18. Connect the remote control cable to RJ11 port (10. 1) (optional). ! Notice! To ensure the LCD display works well with your computer, please configure the display mode of your graphics card to make it less than or equal to 1280 x1024 resolution and make sure the timing of the display mode is compatible with the LCD display. We have listed the compatible "Video Modes" of your LCD display in the appendix (on page 17) for your reference. Adapter rating:12Vdc 4A min. , marked with LPS. 9 (Figure 10. 1) LA1950RTR / LA1950RTC / LA1950RTS LA1950R 10 User Controls Back Panel Controls Power Enter Down Up Menu OSD Key Menu off status Menu appear Brightness Contrast Menu on status Menu disappear/return to main item Main item select up/Adjust up Main item select down/Adjust down Enter/Select sub-item function Power On/Off 11 How to Use the OSD Menus Icon key Name Menu Up Down Enter Power 1. Press the "MENU" button to pop up the "on-screen menu" and press "Up" or "Down" button to select among the five functions in the main menus. Choose the adjustment items by pressing the "Enter " button. Adjust the value of the adjustment items by pressing the "Up" or "Down" button. With the OSD menu on screen, press " Menu" button to return main menu or exit OSD. The OSD menu will automatically close, if you have left it idle for a pre-set time. To Lock the OSD / Power menu buttons, please follow the instructions below. (Please note: the monitor has to be turned ON with a valid signal preset) (a. ) Press "Menu" key , the OSD menu will pops upon display. (b. ) Press and hold the "Menu" key again with the OSD menu on the screen, the OSD menu will disappear. Then press the "Power" key 1 time while the menu key is still being pressed. If the problem persists, please contact your local dealer or our service center. Check that all the I/O and power connectors are correctly and well connected described in the "Installation" section. Check to see if the resolution of your computer is higher than that of the LCD display. [. . . ] Connect the computer to the Touch Interface (RS-232 or USB) that you would like to use. Download the Touch Driver online, then follow the step-by-step instructions as show on monitor. PLEASE NOTE!Doing so may cause a driver conflict, making your touch screen inoperable. 20 Product Registration and Technical Support Register Your Planar Products Today Thank you for choosing Planar. To assure you receive all the benefits of your Planar product and services, register your Planar product today. [. . . ]