User manual PLANAR LA1910R Operations Manual

[. . . ] Use only a dry soft cloth or clean room wiper when cleaning the LCD panel surface. Disconnect the power plug from AC outlet if the product is not used for a long period of time. Don't: Do not touch the LCD panel surface with sharp or hard objects. Do not operate the product under the following conditions: - Extremely hot, cold or humid environment. [. . . ] Press the "Menu" button to pop up the on-screen menu and to select between the four main menus. Choose the adjustment items by pressing the "Select/Auto" button. Adjust the value of the adjustment items by pressing the " " button. 13 On-Screen Display Menus First OSD Menu: Auto-Adjustment Choose this function to obtain an optimum image. Frequency Changes the display data frequency to match the frequency of the graphic card. When a vertical flickering bar is seen, use this function to make an adjustment. Tracking Synchronizes the signal timing of the display with the graphic card. When you are experiencing unstable to flickering image, use this function to make an adjustment. 14 On-Screen Display Menus Second OSD Menu: Display Mode Selects this function to view the display resolution, vertical refresh, and horizontal scan of the current mode. Text-Graphic Toggles between VGA text mode (mode M03H) and graphic mode (mode M13H). Reset Returns the display parameters of the current mode to the factory default settings. 15 On-Screen Display Menus Third OSD Menu: Volume Controls the sound volume. Video Source Changes the video mode between multiple connections. 16 On-Screen Display Menus Fourth OSD Menu: Color Adjusts the color temperature. Color Adjustment-Blue Adjusts the blue color of the display. 17 Appendix Troubleshooting If you are experiencing trouble with the LCD display, refer to the following. If the problem persists, please contact your local dealer or visit Planar Support at www. planar. com/support. Check that all the I/O and power connectors are installed correctly and well connected as described in the "Installation" section. Check to see if the resolution of your computer is higher than that of the LCD display. Reconfigure the resolution of your computer to make it less than or equal to 1280 x 1024. Check and reconfigure the display mode of the vertical refresh rate of your graphic card to make it compatible with the LCD display. Problem: Image is unstable and flickering Use "Tracking" to make an adjustment. Problem: Image is scrolling Check and make sure the VGA signal cable (or adapter) is well connected. [. . . ] Please read "Readme. txt" before you start the installation Please note: Once the CD-Rom is loaded into the PC, it should automatically load the installation software. If the touch screen driver does not automatically load, restart the system. Touch Panel Setting and Calibration: 1. Some setting changes are effective only when the system is rebooted. Planar Systems, Inc. [. . . ]