User manual PLANAR CT1904Z Product Manual

[. . . ] PLANAR LCD MONITOR CT1904Z MANUAL www. planar. com Preface PREFACE About this manual This manual is designed to assist you in setting up and using the LCD monitor. Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. This document contains proprietary information protected by copyright. No part of this manual may be reproduced by any mechanical, electronic or other means, in any form, without prior written permission of the manufacturer. [. . . ] Press either button to scroll horizontally through the main menu and submenu items. Adjust Control Buttons The button allows you to increase the menu item value. LED Power Mode Indicator This LED indicator stays lit when the power is on and when the monitor is receiving a proper video signal. The LED will blink slowly when the LCD monitor is in power saving mode. 3. 4. 5. Hot Buttons for Quick Adjustment of Monitor Settings OSD Menu access button: Press Function button to access the OSD Menu Auto-Adjust button: Press Function button to enter the Auto-adjust feature Contrast adjust button: Press Adjust button to adjust the contrast of the display. Audio Volume button: Press Adjust to adjust the speaker volume of the display. Upstream USB Port (optional) Connect the LCD monitor's upstream USB port to your PC's USB port. Downstream USB Ports (optional) The monitor's two downstream USB ports let the LCD monitor function as a USB hub allowing 2 Chapter 1 the connection of USB compliant devices. The upstream USB port must be connected to your PC for the downstream ports to function. Audio Line-in (optional) Connect your PC's line-out to this jack to listen the PC's audio on the LCD monitor's stereo speakers. VGA Cable Connector This 15-pin D-Sub VGA connector is used to connect to your PC's VGA card. DVI (Digital Visual Interface) Cable Connect (optional) This 24-pin DVI connect is used to connect to you PC's Graphic card which has a DVI conector Adjusting the Viewing Angle Your LCD Monitor is designed to allow you to adjust it to a comfortable viewing angle. The LCD Monitor's tilt angle setting range is from -5° to 15°, and swivel angle setting is from -30° to 30°. Connecting AC Power 1. The plug on the power cable will vary according to the electrical standard in your area. 2. Connect the power connector of the adapter into the jack of the LCD Monitor. The DC power jack is located at the rear of the Monitor. 3 Planar User's Manual Connecting Video 1. Turn off your PC and the LCD Monitor before connecting your LCD monitor to the computer. Connect the VGA signal cable to the D-sub VGA connector located at the rear of the monitor. Main menu Description Submenu The 7-topline menus are: The Auto Adjust option lets the monitor determine and select the settings that are most appropriate for your system requirements. This function will tune the display to your computers video card. The Monitor-Control option allows you to adjust the LCD monitor's display characteristics such as the display's horizontal or vertical position, display phase, display clock, and factory reset. Adjusting these settings should only be necessary if the results from Auto-Adjust function are not satisfactory. The OSD-Control option allows you to adjust the position of the monitor's On Screen Display. 6 Chapter 2 The MISC-Control option allows you to select the desired text language of the OSD, adjust the monitor speaker volume, and to display the current video information being sent to the monitor from your video card. The Graphic-Control option allows you to adjust the display contrast, brightness, sharpness, and color settings. The Graph/Tex option allows you to switch DOS text resolution from 640x400 and 720x400. This function has no effect within graphic operating systems such as MS WindowsTM. The OSD Exit option closes the On Screen Display. Main Functions: Auto Adjust Procedure Pressing the Adjust key while the Auto Adjust topline menu is selected, activates the Auto Adjust procedure. Once finished, the OSD menu will disappear after a short time-out period. The Monitor- Control Option Pressing the Adjust key while the Monitor Control icon is selected activates the Monitor Control submenu. [. . . ] Control Graphic Control Graph/Text OSD Exit Display Area (mm) Response Time (Rise+Fall) Contrast Ratio Brightness Pixel Pitch (mm) Viewing Angle Display Colors Video Interface Scanning Frequency H/V, Hz (Analog mode) Scanning Frequency H/V, Hz (Digital mode) Power Management Power Consumption (ON/OFF, W) Dimensions WxHxD mm Net Weight (Kg) Approx. Power Supply Options Environment Audio (Two 1 Watt speakers with amplifier) Regulatory 376. 32x 301. 056mm (19 inch diagonal) 25ms typ. 0. 294 x 0. 294 Horizontal: 85°/85° (L/R), Vertical: 85°/85° (U/D) Dithering 16M Analog port: VGA Compatible Analog RGB (15-pin D-Sub) Separate Sync. /Composite Digital port: DDWG compliant Single Link Tmds Digital Visual Interface (DVI) 24-80kHz 50-75 30-80kHz 50-75 Meets VESA DPMS 50W (max. )/5W (max. ) (Measured from AC inlet) 467x 452x242 8. 6 12V/4. 16A, 50W Universal Input AC Adapter (External) Wall-mounted bracket, Arm-mounted bracket (VESA Compliance) USB Hub (1 up and 2 down streams), Touch Screen, Operating Temperature: 0 to 40° C Relative Humidity: 10% to 90% Yes UL, CSA, TÜV/GS, CE Mark, VCCI, T-Mark, FCC B DoC, TCO '99 (optional), Nordic 2 Planar CT1904Z 19" SXGA Software Power switch with LED indicator (Press to turn off, over 1 sec. [. . . ]