User manual PIXELA PIX-BU010-01

[. . . ] I can not eject the disc even when the DVD Burner is not creating a disc. With the power ON, slowly put the edge of a paper clip into the Force eject hole on the front of the DVD Burner and push the switch inside. The DVD Burner ejected the disc even though I erased all the disc's data using a PC. [. . . ] About DVD creation Some DVD players may not be capable of playing back the discs written using the DVD function. ) *When data contains still images only, the maximum number of titles is 27. ) [for DVD-VR] The maximum number of programs written on a disc is 99. Discs created using the Data function can be used in Windows XP(R) or later. Do not turn OFF the camera or this product, or disconnect the camera while [Creating disc] LED or [Need more than 1 disc] LED is ON/Blinking. With this product, you can easily burn data stored in your camera to a DVD that is playable on DVD players. You can also create PC-readable data discs using content stored in your camera. For proper use of this product, be sure to read through this instruction guide. Before using this product, please read the Safety Precautions (provided). Attaching noise filters to the USB cable/AC adapter reduces the interference with other devices. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2)this device must accept any interference received, including interference that my cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by tuning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. [. . . ] Do not disconnect or turn OFF the camera while disc writing is in progress. The [Complete] LED turns ON and the disc will be ejected when the disc writing is finished. For disc creation which requires multiple discs, insert discs of the same type as the first disc. [. . . ]