User manual PHILIPS SWV4134S

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PHILIPS SWV4134S. We hope that this PHILIPS SWV4134S user guide will be useful to you.


PHILIPS SWV4134S : Download the complete user guide (92 Ko)

Manual abstract: user guide PHILIPS SWV4134S

Detailed instructions for use are in the User's Guide.

[. . . ] NUMBERED (0-9) Buttons - Press the numbered buttons to select TV channels or to enter certain values within the on-screen menu. For single channel entries, press the numbered button for the channel you desire. The TV will pause for a second or two before changing to the chosen channel. A/CH Button (Alternate Channel) - Press to toggle between the last viewed channel and the channel presently being viewed. [. . . ] pressing both buttons at the same time will display the onscreen menu. Once in the menu, use these buttons to make adjustments or selections. Point the remote control toward the remote sensor window on the TV when operating the TV with the remote. O load the supplied batteries into the remote: Be sure the (+) and (-) ends of the batteries line up correctly (inside of case is marked. Input come from a single (75 ohm) round Your home's signalfrom anmight cable, Antenna Connection a Converter Box, or antenna. If your Cable TV signal or Antenna signal is a round cable (75 ohm) then you're ready to connect to the TV. If your antenna has flat twinlead wire (300 ohm), you first need to attach the antenna wires to the screws on a 300 to 75 ohm adapter. If you have a Cable Converter Box: Connect the OUT(put) plug from the Converter to the 75 ohm plug on the TV. Our Cable TV input into your Direct Cable Connection home may be a single (75 ohm) cable or use a cable box decoder. Follow the steps below to coming from connect your cable signal to your Cable Company new television. After using the AutoProgram Control, press the CH + and ­ buttons to scroll through all the channels stored in the television's memory. Press the CH + or CH ­ buttons to scroll the available channels until CVI appears in the upper left corner of the TV screen. Insert a DVD disc into the DVD player and press the PLAY button on the DVD Player. The description for the component video connectors may differ depending on the DVD player or accessory digital source equipment used (for example, Y, Pb, Pr; Y, B-Y, R-Y; Y, Cr, Cb). Although abbreviations and terms may vary, the letters b and r stand for the blue and red color component signal connectors, and Y indicates the luminance signal. Connect an HD Receiver to the HDMI Input: Please refer to your Receiver's Owner's Manual for more detailed hookup options. If using a Satellite Dish, Cable signal or Antenna signal, connect the 75 ohm round cable from a Satellite Dish to the SATELLITE IN and/or the Cable and Antenna signals to the ANTENNA "A" or "B" IN on the back of the HD Receiver. Connect another 75 ohm round cable from the OUT TO TV jack on the HD Receiver to the 75 ohm IN on the back of the TV. Connect a HDMI cable from the DVI OUT on the HD Receiver to the HDMI Input jack on the back of the TV. Connect the Audio L(eft) and R(ight) cables from the AUDIO Outputs on the HD Receiver to the AV1 AUDIO Inputs on the back of the TV. nOTE: This is not needed if the HDMI Input jack on the TV is connected to a HDMI output in the HD Receiver. With both the HD Receiver and the television ON, press the CH + or CH ­ button on the remote to tune to the HDMI Channel and view the video input from the HDMI supplied signal. [. . . ] AUDIO SYSTEM CONNECTION: Connect one end of the R(ight) and L(eft) AUDIO (Monitor Out) jacks on the TV to the R and L audio input jacks on your amplifier or sound system. To adjust the volume on the audio system, you will need to change the volume at the external audio system, not the television. SECOND VCR CONNECTION: Audio Cables NOTE: Refer to panel number 6 for (Red and White) the proper hookup of the first VCR. Follow the instructions on how to SECOND VCR CONNECTION: tune to the AV1 channel to view a pre-recorded tape. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE PHILIPS SWV4134S




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PHILIPS SWV4134S will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.