User manual PHILIPS SRP6207

[. . . ] 5  esetting the original functions of R the remote control (Factory Reset). 3-4 1 Your SRP6207 Congratulations on your purchase of the Philips SRP6207 universal remote control. After setting up the remote control you can operate up to 7 different devices with it. Simple Setup The universal remote control comes with the innovative Simple Setup technology. [. . . ] 2 4 TV DVR VCR T DVD HD CBL AUX Notes Note SUBT 7 ENT ER ITLE 5 8 3 6 9 Q. SKI P OK SELE CT 0 •  uttons having the same functions as the buttons B Tip on your original remoteL1control may have different L2 namings on the SRP6207 (e. €¢  nly functions that are available on your original O Caution remote control can be used for operating your Warning!L TV DVR DVD CBL command is being sent, when SAT HD AUX you select a device and when the remote control is in setup or learn VCR LEARN POWER SELECT POWER (y). Indd 9 Using the universal remote control 01-02-12 device selection button twice to save your settings and exit setup mode. TV DVR DVD •  hen no button is pressed W SAT CBL 9 HD 2 1 5 for 5 minutes or more, the AUX 2x remote control will exit 4 6 setup8 mode, automatically saving all your settings. T 7 sound of the device 9 P P (normally0 TV) off/on while the picture remains. REPLAY POWER Note Note button will only turn For some TV brands/types, the Tip off the TV. You will have to press a digit button (direct channel selection) to turn on the TV again. (*TiVo/Replay) LEARN POWER When you select DVR mode by pressing the Danger! ontext sensitive buttons, c ordered following the P P OK P P requirements for cable boxes.  eplays the last 7 seconds r (Replay) or 8 seconds (TiVo) of 4 L2 5 6 L1 a program. REPLAY *  iVo and Replay are registered trade marks of their T respective owners. ) have separate buttons on the original remote control to REPEAT C select the part of the combo device to be controlled. For example, if your combo device is a DVD/DVR then its L1 original remote control might have separate DVD and DVR INST. The equivalent button functions can be found on your Philips remote control by using the device selection buttons. Example for a DVD/DVR combo: LEARN POWER 1  et up the remote control for each part of the combo as S described in chapters 2. 2  ress the device selection P button twice to select the DVD part of the combo. TV TV DVR VCR DVD CBL SAT HD AUX LEAR N POW ER DVR VCR 2 1 4 LEARN 9 POWER 5 SAT DVD 2x 6 DVD CBL AUX LEAR N HD CBL AUX  P 7  ress the 8 device selection 0 button twice to select the 3 DVR part of the combo. €¢  ote that this feature is not supported by all codes. 3 P If you missP certain functions from your original remote 0 control on the SRP6207, the SRP6207 can learn these functions. You can store a function under any of the available buttons, except under the button. [. . . ] All user settings will be retained in the remote control memory Caution during battery replacement. If, however, you require extra information or have additional questions about setup, usage, spare parts, warranty, etc. When calling our helpline, make sure to have the SRP6207 at hand when you call, so that our operators can help you determine whether the SRP6207 is working properly. The model number of your Philips universal remote control is SRP6207/27. [. . . ]