User manual PHILIPS SCD278/00

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PHILIPS SCD278/00. We hope that this PHILIPS SCD278/00 user guide will be useful to you.


PHILIPS SCD278/00 : Download the complete user guide (1182 Ko)

Manual abstract: user guide PHILIPS SCD278/00

Detailed instructions for use are in the User's Guide.

[. . . ] The speed at which the warmer heats the milk or food depends on the size of the bottle or container and the starting temperature of the milk or food (e. The following guidelines are the approximate temperature the water* surrounding the container can reach. Setting Approximate water* temperature surrounding the container EN EITHER: Mix one sachet of citric acid (10g) with 200ml/7oz of water. [. . . ] For the guarantee to be valid, please note: • The Electric Bottle and Baby Food Warmer must be used according to the instructions in this leaflet and connected to a suitable electricity supply. € The claim must not be a result of accident, misuse, dirt, neglect or fair wear and tear. 8) During the warming process, the light will come on and off to indicate that the water surrounding the bottle is being heated to the maximum temperature of the setting. 9) Always test the feed and when it has reached the required temperature, remove immediately. 10) Shake the bottle gently and check the temperature of the milk by sprinkling a few drops on to your wrist before you feed your baby. NB: The basket can be removed when heating the AVENT Magic Cup and other makes of bottles. 1 35 – 45 °C 2 45 – 75 °C 3 75 – 85 °C Contents a) Basket b) Warmer body c) Dial d) Baby food container For baby food jars and tins 1) Ensure basket is in place inside the warmer. 3) Fill the warmer with water to 15 mm (1/2 inch) below the top of the jar/tin. Take care when removing the jar or tin as they, and the water surrounding them, will be hot. 7) For small jars/tins you may find it beneficial to place a screw ring from an AVENT Bottle below the jar/tin before adding the water in order to remove the container easily. 8) Stir the food and test it on a spoon yourself to ensure it is not too hot for your baby. The lead supplied must not be used on any other appliance and no other lead should be used with the Electric Bottle and Baby Food Warmer. This product is manufactured to comply with the Radio Interference Requirements and the EEC Directive 89/336/EEC. € If the feed is left in the warmer, the temperature will continue to increase as the thermostat cuts in/out whilst connected to the electric mains. € Always test the feed and when it has reached the required temperature, remove immediately. € Always unplug from the socket after each use to switch the bottle warmer off. [. . . ] De-scaling You should de-scale your Electric Bottle and Baby Food Warmer every four weeks to ensure it continues to work 100 % effectively. 8) Rør rundt i maten med en skje og test den på deg selv for å forsikre at maten ikke er for varm for barnet ditt. Den sladd som medföljer får inte användas till någon annan apparat och ingen annan sladd får användas till den elektriska flask- och barnmatsvärmaren. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE PHILIPS SCD278/00




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PHILIPS SCD278/00 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.