User manual PHILIPS HD9385/20

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PHILIPS HD9385/20. We hope that this PHILIPS HD9385/20 user guide will be useful to you.


PHILIPS HD9385/20 : Download the complete user guide (3690 Ko)

You may also download the following manuals related to this product:

   PHILIPS HD9385/20 (857 ko)
   PHILIPS HD9385/20 (857 ko)
   PHILIPS HD9385/20 (857 ko)
   PHILIPS HD9385/20 (2022 ko)
   PHILIPS HD9385/20 (857 ko)

Manual abstract: user guide PHILIPS HD9385/20

Detailed instructions for use are in the User's Guide.

[. . . ] A serving tray), as this could cause water to accumulate under the appliance, resulting in a hazardous situation. -- Do not touch the body of the kettle during and some time after use, as it gets very hot. If the kettle has been overfilled, boiling water may be ejected from the spout and cause scalding. Be careful when you remove the lid immediately after --1 2 3 4 the water has boiled: the steam that comes out of the kettle is very hot. [. . . ] -- There are 4 buttons that represent different hot drinks: black/fruit/ herbal tea (100ºC), instant soup/hot chocolate (95ºC), instant coffee (90ºC) and green tea (80ºC). , , The water starts heating to the temperature of the selected preset button. , , While the water is heated, the light ring around the selected button slowly pulsates until the water has reached the desired temperature (Fig. , , If the current temperature of the water in the kettle is higher than the temperature of the selected preset button, the light ring does not pulsate, but flashes 3 times to indicate that this button cannot be operated (Fig. Cleaning and descaling Always unplug the base before you clean it Always remove the kettle from the base before you clean the kettle. Never use scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone to clean the appliance. Cleaning the kettle and the base 1 Clean the outside of the kettle and the base with a soft cloth moistened with warm water and some mild cleaning agent. Caution: Do not let the moist cloth come into contact with the cord, the plug and the connector of the base. Cleaning the filter Scale is not harmful to your health but it may give your drink a powdery taste. The anti-scale filter prevents scale particles from ending up in your drink. Clean the single-action filter regularly in the following way: 1 Take the filter out of the kettle (Fig. Note:You can deactivate the appliance by pressing the button again or by removing the kettle from the base. , , When the water has reached the set temperature, you hear an audible signal. The light ring around the selected button stops pulsating and lights up continuously (Fig. Note:You can select a different type of hot drink by pressing a different preset button while the kettle is operating. This is only possible if the temperature of the water is still below the temperature of the newly pressed button. Note: Only use the keep-warm function in combination with a preset button. Only use the keep-warm function when there is at least 0. If there is too little water in the kettle, the kettle may switch off before the 30 minutes have elapsed to protect the heating element. Keeping water warm at a desired temperature 1 Press a preset button to set the desired temperature (see section 2 The kettle heats the water to the temperature of the selected preset Note: HD9385 only:The filter at the bottom of the kettle cannot be removed. You can clean this filter by descaling the kettle, see section ‘Descaling the kettle’ below. Descaling the kettle Regular descaling prolongs the lifetime of the kettle. [. . . ] Note: If you remove the kettle from the base, the set keep-warm temperature is lost. Note: If you press another preset button while the keep-warm function is activated, the keep-warm function switches off and the kettle starts heating up the water to the temperature of the preset button. Note: If the keep-warm function has not been activated, the appliance switches off automatically after 5 minutes of inactivity. Troubleshooting This chapter summarises the most common problems you could encounter with the appliance. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE PHILIPS HD9385/20




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PHILIPS HD9385/20 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.