User manual PHILIPS AW2000

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PHILIPS AW2000. We hope that this PHILIPS AW2000 user guide will be useful to you.


PHILIPS AW2000 : Download the complete user guide (4785 Ko)

You may also download the following manuals related to this product:

   PHILIPS AW2000 (3682 ko)
   PHILIPS AW2000 (3684 ko)
   PHILIPS AW2000 (3685 ko)
   PHILIPS AW2000 (3689 ko)
   PHILIPS AW2000 (3690 ko)
   PHILIPS AW2000 (3692 ko)
   PHILIPS AW2000 (3694 ko)
   PHILIPS AW2000 (3690 ko)
   PHILIPS AW2000 (3696 ko)
   PHILIPS AW2000 (3693 ko)
   PHILIPS AW2000 (3684 ko)
   PHILIPS AW2000 (3693 ko)
   PHILIPS AW2000 (3677 ko)
   PHILIPS AW2000 (3679 ko)
   PHILIPS AW2000 (3686 ko)
   PHILIPS AW2000 (3680 ko)
   PHILIPS AW2000 (3684 ko)
   PHILIPS AW2000 QUICK START GUIDE (551 ko)
   PHILIPS AW2000 QUICK START GUIDE (546 ko)
   PHILIPS AW2000 QUICK START GUIDE (551 ko)
   PHILIPS AW2000 QUICK START GUIDE (551 ko)
   PHILIPS AW2000 QUICK START GUIDE (546 ko)
   PHILIPS AW2000 (3640 ko)
   PHILIPS AW2000 QUICK START GUIDE (546 ko)

Manual abstract: user guide PHILIPS AW2000

Detailed instructions for use are in the User's Guide.

[. . . ] When it comes to adjust month and day, you may press AUTO SCAN/DATE to change the display order between month and day. Repeat steps 2-3 to complete all the other settings for month, day, hour and minute. Helpful hints: If you already adjust the time to your local time, RCC time searching will auto update to your local time. Standby power consumption (clock mode). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1. 5W 1 2 ­ ­ 1 1 2 · · Setting the clock and date (see 2) The clock uses 24-hour time format. [. . . ] For the first time when the set is powered on, or reconnected to power, the set will auto perform RCC searching. 3 4 ­ 1 Digital tuner Digital tuner 1 Tuning to radio station Press RADIO ON/OFF to switch on the radio (FM only). Press and hold TUNING +/- until the frequency in the display starts running. To tune to a weak station, press TUNING +/- briefly and repeatedly until you have found optimal reception. To improve reception: FM: Extend and adjust the pigtail for optimum reception. Programming radio stations You can store up to a total of 10 radio stations in the memory (10 FM) manually or automatically (Auto store). Manual programming 1 2 Tune to your desired station (see Tuning to radio stations). Helpful hints: You can erase a preset station by storing another frequency in its place. Autostore Autostore automatically starts programming radio stations from preset 1. In radio mode, press AUTO SCAN/DATE until the frequency in the display starts running. After all stations are stored, the first autostore preset station will then automatically play. Note: ­ The effective range of the sensor is 50 meters away from the main unit. The range may vary from the actual geographical situation. Using the sensor to detect outdoor temperature The main unit comes with a outdoor sensor. Using the sensor, the unit is capable to measure and display outdoor temperature through receiving data trasmitted from the sensor placed at other location. Wirelessly Connecting the sensor to the main unit Place the sensor in a desired open area. The place must be within 50 meters away from the main unit. For the first time using the outdoor sensor and the main unit, press RESET located on the sensor back, and RESET located in the battery compartment of the main unit. Then, the main unit will begin to receive transmission from the sensor. To update the outdoor temperature from the sensor any time, press and hold AUTO SCAN/DATE for 5 seconds. The temperature will be updated from the sensor about every 3 minutes. · Indoor temperature and humidity The unit can also auto measure and display current temperature. Press DISPLAY to toggle the display between indoor temperature, indoor humidity and outdoor temperature (See 2, 3, 4). To select between oC or oF reading, use the (oC oF) slide switch (located in the battery compartment). · 1 · · · Illumination brightness · Press REPEAT ALARM / brightness control once or more. The brightness of the display can be adjusted: Bright Low Off Bright · · Low battery indication When the batteries of the main unit or the sensor are running low, the low battery icon will be displayed on the main unit, or the sensor, indicating that the batteries should be replaced soon. When the outdoor temperature is updating with the sensor searching, is displayed on the main unit. [. . . ] The brightness of the display can be adjusted: Bright Low Off Bright · · Low battery indication When the batteries of the main unit or the sensor are running low, the low battery icon will be displayed on the main unit, or the sensor, indicating that the batteries should be replaced soon. When the outdoor temperature is updating with the sensor searching, is displayed on the main unit. (See 4) To Improve the sensor reception In case of intermittent/no connection, slide the CHANNEL switch to Channel 2 or 3, located in the battery compartment of the sensor, then repeat the setup connection described above. reduce the distance between the sensor and the main unit. · · Safety and maintenance Safety and general maintenance · If you do not intend to use the clock radio for a long time, withdraw the power cord from the wall outlet. Place the set on a hard and flat surface so that the system does not tilt. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE PHILIPS AW2000




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PHILIPS AW2000 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.