User manual PHILIPS 40759-53-16

[. . . ] EXTRA: when the coffee brew switch is steadily illuminated, the machine is ready. PREMIUM: when the two brew buttons are steadily illuminated, the machine is ready. Fill the water tank up to the MAX level indicated, using only fresh, non-sparkling, drinking water. Do not operate the machine if water is not present: make sure there is enough water in the tank. [. . . ] The machine will automatically end the brewing once the programmed coffee quantity has been reached. The co ee brewing can be interrupted at any moment by pressing the dosed co ee brew button again. EXTRA: press the coffee brew switch again to stop dispensing and close the steam / hot water knob. PREMIUM: press the manual brew button again to stop dispensing and close the steam / hot water knob. PREMIUM: with this procedure you can dispense up to 250 cc of water for each dispensing. Press the dosed coffee brew button and hold it until the desired quantity of coffee to programme is brewed. Release the dosed coffee brew button and bring the lever back to the off position. Place an empty container under the steam / hot water wand and open the knob slowly for a few seconds to let any residual water Come out until only steam is dispensed. Never use solvents, alcohol, harsh substances to dry the machine components, and never place them in an oven. Wash the components (except the electrical ones) with cold/lukewarm water and non-abrasive cloths/sponges. CLEANING THE STEAM / HOT WATER WAND After using the steam / hot water wand, dispense steam for a few seconds. Dispense the whole content of the tank through the steam / hot water wand. When water is finished, fill the tank again and repeat the operations described in step 11 . DESCALING Limescale normally builds up with extended use of the appliance; the machine needs descaling every 3 - 4 months and/or whenever a reduction in water flow is noticed. In case of con ict, priority must be given to what is indicated in the operation and maintenance manual over the instructions provided on separately sold accessories and materials. Its formula has been designed to ensure better machine performance and operation for its whole operating life. if correctly used , it also avoids alterations in the brewed product. The descaling solution must be disposed of according to the manufacturer's instructions and/or regulations in force in the country of use. note: if the optional water filter is used , REMOVE IT BEFORE DESCALING. Never drink the descaling solution or any products dispensed until the cycle has been carried out to the end. Pour HALF the content of the Saeco concentrated descaling solution into the water tank, and then fill it with fresh water up to the MAX Problems The machine does not turn on. EXTRA: power light is off after having turned the machine ON and waited for a few minutes. [. . . ] Do not pull out the plug by pulling on the power cord or touch it with wet hands. Never allow water to come into contact with any of the electrical parts of the machine. Children are not aware of the risks related to electric household appliances. Do not leave the machine packaging materials within the reach of children. [. . . ]