User manual PHILIPS AVENT SCD535

[. . . ] ς ES Manual del usuario FI Käyttöopas 5 20 35 52 71 87 102 IT Manuale utente NL Gebruiksaanwijzing NO Brukerhåndbok PT Manual do utilizador SV Användarhandbok TR Kullanım kılavuzu 118 134 150 165 182 197 FR Mode d’emploi 1 Congratulations on your purchase and welcome to Philips AVENT!To fully benefit from the support that Philips AVENT offers, register your product at www. Philips AVENT is dedicated to producing caring, reliable products that give parents the reassurance they need. This Philips AVENT baby monitor provides round-the-clock support by ensuring you can always hear your baby clearly without any distracting noise. [. . . ] 4 Stopping a lullaby 1 Press the + button to select ‘Stop’ from the list. 12 D Note: You can only adjust the microphone sensitivity in the menu of the parent unit. You can set the microphone sensitivity of the baby unit to the desired level. You can only change the microphone sensitivity when a connection between the baby unit and the parent unit has been established, i. When the LINK light on the parent unit lights up green continuously. 3 Select the desired microphone sensitivity level for the baby unit with the + and buttons. €24) 1 Minimum sensitivity level 2 Maximum sensitivity level 4 Press the OK button to confirm. D Note: When the microphone sensitivity of the baby unit is set to a high level, it picks up more sounds and therefore transmits more often. As a result, the units consume more power and the operating time of the battery is shorter. 7 Setting room temperature range D Note: You can only adjust the temperature range in the menu of the parent unit. A baby will sleep comfortably in a room heated to a temperature between 16°C and 20°C. This is important, since a baby cannot regulate its body temperature as well as an adult. If you do not set a temperature range, the baby monitor alerts you when the temperature in your baby’s room drops below 14°C or rises above 35°C. In this case, the backlight of the parent unit display goes on and ‘High’ or ‘Low’ appears on the display. To change the default minimum and maximum temperature, follow the instructions below. D Note: The temperature of the baby’s room is shown on the display of both units when they are linked. 6 Sound alert on/off D Note: You can only switch the sound alert on and off in the menu of the parent unit. It enables you to switch off the volume on your parent unit and still be alerted if your baby cries. If the sound alert is switched on, the parent unit beeps as soon as the fourth sound level light lights up while the volume is switched off. In addition, the backlight of the parent unit display goes on and the sound alert symbol ( g) flashes on the display. 5 Adjusting microphone sensitivity 5 If the alert is off, the display shows ‘On?€• If you have set the sound alert to ‘on’, the sound alert symbol ( g) appears on the display of the parent unit. [. . . ] Dette øger risikoen for, at dit barn bliver forkølet eller får influenza og nedsætter dit barns modstandsdygtighed over for bakterieangreb. 3 Tryk på tasten + en eller flere gange for at vælge en af de fem vuggeviser fra listen eller for at vælge “Play all” (Afspil alle). Følg nedenstående instruktioner for at ændre standardindstillingen for minimum- og maksimumtemperatur. Hvis vibrationsalarmen er tændt, vibrerer forældreenheden, så snart den fjerde indikator for lydniveauet lyser, mens der er slukket for lyden. [. . . ]