User manual PHILIPS AVENT SCD525

[. . . ] Register your product and get support at SCD525 EN User manual DA Brugervejledning DE Benutzerhandbuch EL Εγχειρίδιο χρήση ς ES Manual del usuario FI Käyttöopas 5 20 34 50 68 84 98 IT Manuale utente NL Gebruiksaanwijzing NO Brukerhåndbok PT Manual do utilizador SV Användarhandbok TR Kullanım kılavuzu 113 128 143 157 172 186 FR Mode d’emploi 1 Congratulations on your purchase and welcome to Philips AVENT!To fully benefit from the support that Philips AVENT offers, register your product at www. Philips AVENT is dedicated to producing caring, reliable products that give parents the reassurance they need. This Philips AVENT baby monitor provides round-the-clock support by ensuring you can always hear your baby clearly without any distracting noise. [. . . ] D Note: When the microphone sensitivity of the baby unit is set to a high level, it picks up more sounds and therefore transmits more often. As a result, the units consume more power and the operating time of the battery is shorter. 2 Switching to another lullaby 1 Press the + button to choose another lullaby from the list. If you do not continue the lullaby within 30 seconds, the lullaby function switches off automatically. The message ‘Paused’ and the lullaby symbol disappear from the display. 6 Sound alert on/off D Note: You can only switch the sound alert on and off in the menu of the parent unit. It enables you to switch off the volume on your parent unit and still be alerted if your baby cries. If the sound alert is switched on, the parent unit beeps as soon as the fourth sound level light lights up blue while the volume is switched off. In addition, the backlight of the parent unit display goes on and the sound alert symbol ( q) flashes on the display. €• If you have set the sound alert to ‘on’, the sound alert symbol ( q) appears on the display of the parent unit. 3 Pausing a lullaby 1 Press the + button to select ‘Stop’ from the list. 5 Adjusting microphone sensitivity D Note: You can only adjust the microphone sensitivity in the menu of the parent unit. You can set the microphone sensitivity of the baby unit to the desired level. You can only change the microphone sensitivity when a connection between the baby unit and the parent unit has been established, i. When the LINK light on the parent unit lights up green continuously. 12 D Note: You can only adjust the temperature range in the menu of the parent unit. A baby will sleep comfortably in a room heated to a temperature between 16°C and 20°C. This is important, since a baby cannot regulate its body temperature as well as an adult. If you do not set a temperature range, the baby monitor alerts you when the temperature in your baby’s room drops below 14°C or rises above 35°C. In this case, the backlight of the parent unit display goes on and ‘High’ or ‘Low’ appears on the display. To change the default minimum and maximum temperature, follow the instructions below. D Note: The temperature of the baby’s room is shown on the display of the parent unit when they are linked. [. . . ] For at få fuldt udbytte af den support, Philips AVENT tilbyder, skal du registrere dit produkt på www. €• Apparatet bør holdes uden for børns rækkevidde for at sikre, at de ikke kan komme til at lege med det. €• Hverken baby- eller forældreenheden må udsættes for ekstrem kulde eller varme eller for direkte sollys. €• Placer altid genopladelige batterier af den korrekte type i forældreenheden for at undgå eksplosionsfare. [. . . ]