User manual PHILIPS AVENT BABYPHONE DECT 570/00

[. . . ] Always here to help you Register your product and get support at www. Com/welcome to register your product and to read the detailed user manual. €1) 1 Signal strength indicator 2 Eco Max indicator 3 Night dim mode symbol 4 Cry alert indicator 5 Mute symbol 6 Battery status indicator 7 Navigation arrow 8 Temperature symbol 9 Microphone sensitivity indicator 10 Nightlight symbol 11 Lullaby symbol 12 Timer or timer repeat symbol Preparing for use IMPORTANT: Read the safety instructions carefully before you use the baby monitor and keep them for future reference. To guarantee automatic power backup in case of mains failure, you can insert four 1. [. . . ] Note: Press the MENU button if you want to leave the menu without making any changes. If there is no input in the menu for more than 20 seconds, the menu closes automatically. Sensitivity This option in the parent unit menu allows you to set the microphone sensitivity of the baby unit. The microphone sensitivity determines what noise level the baby unit picks up, e. You will want to hear when your baby cries, but you may be less interested in its babbling. 1 Select ‘Sensitivity’ in the menu with the + and - buttons and press OK to confirm. 2 Use the + and - buttons to increase or decrease the microphone sensitivity. 10 English Sensitivity levels and indications Icon Sensitivity highest high Description Hear everything from your baby. If your baby does not make any sound, the speaker of the parent unit is off. If your baby makes softer sounds, the speaker of the parent unit does not go on. The speaker of the parent unit only goes on if the baby makes loud sounds, for instance because it is crying. medium low Eco Max mode Smart Eco is a standard feature on this baby monitor. It automatically reduces the DECT signal from the baby unit to save energy. In this mode, the DECT signal of the baby unit is switched off as long as the baby does not make a sound. Caution: When the baby makes a sound, there may be a slight delay in response because the DECT signal has to switch on again before the baby unit can send feedback to the parent unit. Please note the following: -In Eco Max mode you do not receive feedback when the parent unit is out of range of the baby unit. -- You cannot switch on the Eco Max mode if the microphone sensitivity is set to level 4. Activating Eco Max mode 1 Select ‘Eco Max’ in the menu with the + and - buttons and press OK to confirm. 2 When the display shows ‘Turn On’, press OK to switch on the Eco Max mode. If you do not press OK, the parent unit leaves the menu and the Eco Max mode remains off. , , The Eco Max indication flashes on the display and the ‘link’ light flashes green slowly (Fig. , , When the parent unit receives a DECT signal from the baby unit because the baby makes a sound, the ‘link’ light turns solid green. [. . . ] 1 Tryk på knappen Q på babyenheden for at tænde for natlampen. €3) 16 Dansk 3 Hvis du vil justere lydniveauet for vuggevisen, skal du trykke på + eller – tasten for lydstyrke på babyenheden (fig. 2 Tryk på + knappen for at øge lydstyrken eller på - knappen for at sænke lydstyrken. Alarm for lavt batteriniveau på babyenheden 1 Når babyenheden kører på batteristrøm, og batterierne er ved at løbe tør, bipper forældreenheden, og teksten “Baby unit Change batteries” (Udskift batterierne i babyenheden) vises på displayet. [. . . ]