User manual PFAFF SEQUENCING

[. . . ] Stitch positioning Note: All symbols and options will not be shown at the same time. 1 2 3 9 16a 4 10 5 7 6 12 8 11 15a 15b 15 16 17 18 Sequencing 16b 16c 13 14 19 Sequencing can be used in both sewing mode and in embroidery mode. To close sequencing and sew your created combination, touch the symbol on the task bar again. [. . . ] Note: If creating a sequence in embroidery mode, tie-offs at the beginning and end will be added automatically, allowing you to create a sequence in between. This is useful for example at the end of the sequence if you want to sew it only once or to create a sequence in several rows. Insert the thread snips command (16c) if you want the machine to tie-off and cut the threads and raise the presser foot. This confirms that the command is inserted and it also shows where the command will be performed in the sequence. Note: The commands will appear on the screen in the order you program them. Sequencing 5:4 Directional stitches (17) Add directional stitches between stitches in a sequence. These stitches make it possible to move stitches in various directions and you can create new shapes and wider large-area borders. Directional stitches are straight stitches with a length of approximately 1mm and can be used in 16 different directions. The selected angle will be indicated in red (A) in the directional field (B). Touch the directional field to select which angle you want to insert a stitch. You can either touch the desired line on the white area or touch and drag the red line and then release it at the desired angle. When the intended angle is selected, touch the insert icon (D) and one stitch will be inserted in the sequence at the cursor position. The directional stitch can be deleted, duplicated or mirrored without closing the directional stitches pop-up. 17 A B C D 18 Horizontal preview (18) To see your sequence horizontally, touch the preview icon. If it is too long for the window, it is possible to zoom to all (E) to see the entire sequence. You can also scroll through the sequence with the arrows (F). Sequencing E F Sewing a sequence To sew the sequence, return to sewing mode or embroidery edit. [. . . ] To use sequencing in either sewing mode or embroidery mode A sequence created when sewing mode is active will not be available when opening sequencing after activating embroidery mode and vice versa. The created sequence will not be transferred to the other mode. Sequencing 5:6 Common sequencing pop-ups Not an editable stitch Some stitches are not possible to insert in a sequence, for example buttonholes and four direction stitches. [. . . ]