User manual PFAFF HOBBYLOCK2.0

[. . . ] 2 PREPARATION 13 13 14 15 15 16 17 18 Unpacking the Smart Station Removing the Packaging Checking the Components Parts Front Buttons Rear View Side Adjusting the Product Tilt Chapter. 4 USING MHL 42 43 44 MHL(MobileHigh-DefinitionLink) Using MHL Disabling MHL 2 Chapter. 5 CONNECTING AND USING A SOURCE DEVICE 45 45 45 46 46 47 48 48 50 50 Checklist before Connecting to Source Devices Pre-connection Checkpoints Connecting the Power Connecting and Using a PC Connecting to a PC Driver Installation Setting Optimum Resolution Changing the Resolution Using a PC Connecting to a Video Device Connecting to an Audio Output Device Chapter. 7 CONFIGURING THE TINT SETTINGS 56 56 57 57 57 57 58 58 58 58 Red Configuring Red Green Configuring Green Blue Configuring Blue Color Tone Configuring Color Tone Gamma Configuring Gamma Chapter. [. . . ] To move the keyboard and mouse pointer focus to the smartphone more quickly, doubleclick the Mobile Control icon on the far right side of the taskbar and activate Fast Control Mode. In this mode, shifting the keyboard and mouse pointer focus is faster and the battery charging function is not available. For details on changing the shortcut keys, refer to "Changing the Settings"(page 40). USB 36 Using Smart Station Android tablet * When your mobile device has a normal USB port Mobile devices should be purchased separately. wired connection Wireless connection (for Series 7 only) NOTE · If your tablet has a Micro USB port, you can use the same connection method as the Android smartphone. Charging/Control Mode is not supported and battery charging is not possible. ⷠBefore connecting to your mobile device, check that the Mobile Control icon is found on the far right side of the taskbar. Next, connect the tablet to the Smart Station monitor using the connected mobile cable and USB Connection Kit. * When the USB Connection Kit (Micro USB to Normal USB) is connected, Fast Control Mode is the default mode. * To charge your tablet, connect the tablet to a USB port on the Smart Station monitor using the USB cable provided with the tablet. mOBILE MOBILE NOTE High-speed charging is possible using the [ ] port only. * When the USB Connection Kit (Micro USB to Normal USB) is connected, Fast Control Mode is the default mode. To move the keyboard and mouse pointer focus from the scanning PC to the secondary PC, move your mouse cursor on the screen of the scanning PC to the screen of the secondary PC. The keyboard and mouse pointer focus will move in the same manner as when using dual displays. (Alternatively, press the mouse wheel or the shortcut keys (Alt + S) on the keyboard. For details on changing the shortcut keys, refer to "Changing the Settings"(page 40). uSB Connection Kit (Micro USB to Normal USB) 39 Using Smart Station Changing the Settings 1. Right-click on the Mobile Control icon on the far right side of the taskbar. Changing the position of a PC (Mobile Control) When connected to two PCs 1. Connect the scanning PC to the Smart Station monitor using the provided USB cable or wireless-connection dongle. Connect the secondary PC to the Smart Station monitor using the mobile cable and USB Connection Kit (Micro USB to Normal USB). NOTE For details on how to connect to two PCs, refer to the section "Connecting to two PCs" (page 39). [. . . ] You can change the screen brightness, tint, size and many other settings using menus displayed on the screen. HUB HUB refers to a device that is a common connection point for multiple devices connected over a network. It is used to connect multiple PCs, video devices, office devices and/or LANs over a single network. Wireless-connection dongle - for Series 7 only Dongle refers to a device that connects to an input/output port on a PC. [. . . ]