User manual PFAFF HD SCREEN

[. . . ] Embroidery toggle icon The embroidery toggle icon switches between embroidery edit and embroidery stitch-out. Since embroidery edit and embroidery stitch-out are only available if embroidery mode is active, this icon (8) will be hidden when sewing mode is active. 1 2 3 4 5 6 7 Main functions in task bar 8 Task bar in embroidery mode 3:2 Use the task bar Toggle between the sewing mode and the embroidery mode by using the toggle icon (1). When a function is activated, the icon will be selected and you can make your adjustments. [. . . ] Every single stitch point, marked with an outlined square, can be edited. Start with an empty stitch field and build your stitch or insert a stitch for further adjustments. 3:7 Settings menu In the Settings menu, you can override automatic settings and make manual adjustments to the machine settings (A), sound settings (B) and screen and light settings (C). The settings are saved even after turning off the machine. Machine settings (A) Owner's name Touch the icon to get a pop-up where you can enter your name. Twin needle Touch the icon to open a list for twin needle width selections. When a twin needle size is selected, the width of all stitches is limited for that needle size to prevent needle breakage. When a twin needle size is selected, a pop-up is shown when turning on your machine. Another warning pop-up is shown when selecting a stitch that is too wide for the set twin needle size. The stitch width of those stitches is automatically adjusted to fit the twin needle. Stitch width safety Select this function when using a straight stitch stitch plate or a straight stitch presser foot to lock the center needle position for all stitches to prevent damage to the needle, presser foot or stitch plate. When turning on the machine with this setting activated and for every stitch selection that is not a straight stitch, a pop-up informs you that it is set to straight stitch. Note: Twin needle and stitch width safety cannot be used at the same time. Beading foot The beading foot setting will make sure that the tie-off is not made in the center position, where it might hit a pearl. Deselect the beading foot setting to go back to normal sewing. Pfaff HD screen A B C Pop-up for twin needle selection. 3:8 AutoSave current state When AutoSave current state is selected, the machine will save current state periodically while embroidering and also when you stop embroidering. The information about the embroidery will be saved even after switching the machine off. Note: If AutoSave current state is selected it can take longer to go from Embroidery edit to Embroidery stitch-out. Cut jump stitches Your machine features the automatic function Cut jump stitches. This function saves you time trimming after the embroidery is completed. When Cut jump stitches is selected your machine will trim the top jump stitch thread and pull the thread end to the underside of the fabric as you embroider. Note: Your machine will also cut the thread after you have changed to a new color. Hold the thread end when you start embroidering again, so that you can easily remove the thread end when cut. Jump stitch trim commands can be added to any design using the 4DTM Organizer Software, included with your machine. [. . . ] Adjust Custom LED lights Adjust the brightness and the color temperature of the Custom LED lights on your machine to make it perfect for all types of fabric and the light conditions in your sewing room. Simply move the button right or left on the slides. Pfaff HD screen A B C 3:12 Info menu Use the info system to easily get help topics and information. The Info menu is a built-in shortened version of the Owner's manual. When you touch the info menu icon on the task bar, you have four options to select from - category (J), index (K), personal info (L) and notes (M). [. . . ]