User manual PFAFF CREATIVE 2170

[. . . ] creative Owner`s manual 2170 This household sewing machine is designed to comply with IEC/EN 60335-2-28 and UL1594 IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic safety precautions should always be followed, including the following: Read all instructions before using this household sewing machine. DANGER - To reduce the risk of electric shock: · A sewing machine should never be left unattended when plugged in. Always unplug this sewing machine from the electric outlet immediately after using and before cleaning. Replace bulb with same type rated 5 Watt. WARNING - To reduce the risk of burns, fire, electric shock, or injury to persons: · Do not allow to be used as a toy. Close attention is necessary when this sewing machine is used by or near children or infirm person. [. . . ] Scroll bar: The scroll bar is only active if the stitch pattern is longer than the workspace. Use the scroll bar to view your stitch pattern while zoomed in. L M N Decorative sewing S Create a new stitch pattern by placing single stitches When you open the Stitch Creator the workspace is empty. To create a new stitch pattern you must first place the starting point. This means that you set the position of the first stitch in the work space. Touch the Confirm icon (E) to place the starting point and the first stitch. E 4:12 Placing single stitches For each additional stitch you want to place, touch the confirm icon (E). To move single stitches V With your stylus or your finger you can work with your stitches directly on the work space by dragging and dropping a selected stitch point. To position a stitch point just touch it on the screen and drag it to the desired position. When you do this you will change the stitch width and the stitch length of the selected stitch. Another way to move the stitch point of a selected stitch and for fine adjustment is to use the stitch length (T) and stitch width icons (U). T U The last stitch of the sequence is marked with blue and the last stitch point is marked with a red frame. The dotted line, the cursor line (V), at the end of the last stitch shows where the following stitch will be added (if the x-coordinate of the last stitch is not the same as the first stitch). This ensures that the fabric is fed evenly when you sew out your stitch pattern. If you place the last stitch exactly at the same position (x-coordinate) as the first one of your stitch pattern the dotted cursor line will not be sewn. Touch ESC to return to the Stitch Creator menu, for further editing. E Decorative sewing 4:13 Combining single parts of patterns With the Stitch Creator you can also edit and combine existing stitches. Touch the Mini main menu (W) to open the main menu where you can call up stitches that you wish to add in your stitch pattern. The whole stitch is automatically selected and marked with blue when it appears on the workspace. Touch the arrow up (Y) or the scroll bar (Z) between the arrows to move forward to the tip of the heart without selecting any further stitches. Touch arrow up or the scroll bar to select the next circle to be deleted. The red frame is now positioned on the tip of the heart and one stitch is selected. Touch the Start sewing icon (1)to open the the sewing menu to see the whole stitch pattern. 1 Z Y X 4:14 Combining pattern components A In the Stitch Creator you have 8 pattern components for creating new stitch patterns. [. . . ] The light bulb is located inside the sewing machine near the needle threader. Bulb removal Push the light bulb changer up as far as it will go. Now turn the bulb half a rotation counter clock-wise and remove the bulb. Insertion of the bulb Important: Use a light bulb as indicated on the left side of the machine, 12 V max 5 W. Guide the bulb into the diagonal holder and turn it until the pins of the bulb engage. Push the bulb upward into the holder as far as it will go and turn it half a rotation in a clock-wise direction. [. . . ]