User manual PENTAX ZX-5

[. . . ] · A band of light may appear on the display if the camera is aimed at a bright subject. · There is a possibility that the illustrations and the display screen in this manual are different from the actual product. · In this manual, both an SD Memory Card and an SDHC Memory Card are referred to as SD Memory Cards hereafter. · In this manual, the generic term "computer(s)" refers to either a Windows PC or a Macintosh hereafter. Using Your Camera Safely We have paid close attention to the safety of this product. [. . . ] · When set to c (Digital SR), 9 (Green), C (Movie), or (Underwater Movie) mode, only [AUTO] is available. · When set to S (Fireworks) mode, the sensitivity is fixed at 64. · When sizes of 3:2 or 16:9 are selected, you cannot select 3200 or 6400. · When the shooting mode is set to (Report), the AUTO is fixed at 64-6400. Saving the Sensitivity setting 1p. 143 3 Setting ISO Correction in AUTO Set the sensitivity range when the sensitivity is set to AUTO. The sensitivity can be set to 64-100, 64-200, 64-400, 64-800, and 64-1600. 120 Taking Pictures 1 2 3 4 Press the 3 button in A mode. The [A Rec. Mode] menu appears. Use the four-way controller (23) to select [ISO Corction in AUTO]. Press the four-way controller (5). A pull-down menu appears. Use the four-way controller (23) to select the sensitivity adjustment range. Rec. Mode AE Metering Sensitivity ISO Corction in AUTO EV Compensation Movie D-Range Setting MENU Cancel 2/4 ISO64-100 ISO64-200 ISO64-400 ISO64-800 ISO64-1600 OK OK 5 6 Press the 4 button. The setting is saved. Press the 3 button. The camera returns to capture mode. Setting the Exposure (EV Compensation) For adjusting the overall brightness of the picture. Use this function to take pictures that are intentionally overexposed or underexposed. 1 2 3 Press the 3 button in A mode. The [A Rec. Mode] menu appears. Use the four-way controller (23) to select [EV Compensation]. MENU 3 Use the four-way controller (23) to set the seconds, then press the fourway controller (5). The setting is saved, and the frame returns to [Interval]. 5 6 Press the four-way controller (3). The frame moves to [Number of Shots]. Set the number of shots. 1 Press the four-way controller (5). 2 Use the four-way controller (23) to set [Number of Shots], then press the four-way controller (5). The setting is saved, and the frame returns to [Number of Shots]. 7 8 Press the four-way controller (3). The frame moves to [Start Delay]. Set the start delay. 3 Taking Pictures Interval Shoot 1 Press the four-way controller (5). Current Time 10:00 AM The current time and the recording start Start Time 10:00 AM time are displayed in real-time. Start Delay set the hours, then press the four-way MENU Cancel OK OK controller (5). 3 Use the four-way controller (23) to set the minutes, then press the four-way controller (5). The setting is saved, and the frame returns to [Start Delay]. 9 Press the 3 button twice. The camera returns to the shooting screen. The operations up to this point have only configured the [Interval Shoot] settings. To actually use interval shooting, you must select [Interval Shoot] from the drive mode. Taking Pictures at a Set Interval (Interval Shoot) 1p. 95 · Interval Shoot is unavailable in F (Digital Panorama), X (Digital Wide), 9 (Green), and S (Fireworks) modes. · Refer to p. 140 for instructions on interval shooting for C (Movie) and (Underwater Movie). [. . . ] See www. dtsc. ca. gov/hazardouswaste/perchlorate Declaration of Conformity According to 47CFR, Parts 2 and 15 for Class B Personal Computers and Peripherals We: PENTAX Imaging Company A Division of PENTAX of America, Inc. Located at: 600 12 th Street, Suite 300 Golden, Colorado 80401 U. S. A. Phone: 303-799-8000 FAX: 303-790-1131 Declare under sole responsibility that the product identified herein complies with 47CFR Parts 2 and 15 of the FCC rules as a Class B digital device. Each product marketed is identical to the representative unit tested and found to be compliant with the standards. Records maintained continue to reflect the equipment being produced can be expected to be within the variation accepted, due to quantity production and testing on the statistical basis as required by 47CFR §2. 909. [. . . ]