User manual PENTAX PV-U1100A

[. . . ] Reboot your PC after installation is finished (Other settings are not necessary during installation). 1 2 Turn on your computer. Insert the CD-ROM (S-SW35) into your CD-ROM drive. The PENTAX Software Installer screen is displayed on the desktop. · If the PENTAX Software Installer screen does not appear Display the PENTAX Software Installer screen following the steps below. 1) Click [Start], then select [My Computer]. 3) Double-click [Setup] (Setup. exe). 3 Click your applicable language. You can choose the languages from the displayed screen. [. . . ] Insert the CD-ROM (S-SW35) into the CD-ROM drive. The PENTAX Software Installer screen appears shortly. · If the PENTAX Software Installer screen does not appear Display the PENTAX Software Installer screen following the steps below. If your PC is running Windows Media Player earlier than version 7. 1, a message such as the one shown on the right may appear during installation. In this case, follow the instructions below to update Windows Media Player before installing the software. [Cancel] and click [Finish] when the message appears telling you that the software has been successfully installed. 2 Follow 4 in Step 3 to install Windows Media Player first and then reinstall ACDsee for PENTAX2. 0. The panoramic image software "ACD photostitcher", the image layout and printing software "FotoSlate 3. 0", and the movie editing software "ACD Showtime!for PENTAX" are also installed when you install all program features of ACDSee for PENTAX 2. 0 (complete installation). Even when you complete the installation the icon of "ACD Photostitcher" is not displayed. 4 8 Click [USB Driver] on the Software Installer screen The InstallShield Wizard screen will appear. Complete InstallShield Wizard screen will appear. Click [Start], then select [My Computer] (Windows XP). When using Windows 98/98SE/Me/2000, double-click [My Computer] on the desktop. Double-click the [Install ACDSee] icon. The PENTAX Software Installer screen appears. Double-click the [Master Installer] icon to display the PENTAX Software Installer screen. You can choose the languages from the displayed screen. A selection screen to install your desired software appears. Windows Step 5 7 Double-click the [DCIM] folder. Images are stored in folder [xxxPENTX], where "xxx" is a threedigit folder number. Transferring Images to a Windows PC If you connect your computer to the camera and as the power is switched on, the camera will be recognized automatically. You can transfer an image to your computer after ACDSee Device Searching display appears on the screen. · If the digital camera is connected to your PC in [PictBridge] USB Connection mode, the images cannot be transferred. Disconnect the USB cable from your camera and PC, follow the instructions in "Setting Up Your Digital Camera" to set the USB Connection mode to [PC], and then reconnect the USB cable. · We recommend using an AC Adapter D-AC8 (optional) when connecting your camera to your computer. Your image data could be corrupted if your batteries run out during image transfer. 6 8 Select the folders you want to copy to the PC. Hold the [Ctrl] key on the keyboard while clicking on the folders in which the images you want to copy are stored. Select folders Click [ACDSeeTM]. The setup screen appears. Follow the on-screen guidance to input registration information and install the software. 9 Select [Copy To Folder. . . ] from the [Edit] menu. The Copy Files screen appears. Connecting the Camera and PC 1 2 Turn your PC on. With your camera turned off, connect to your PC using the USB cable. 10 11 Specify the destination folder. Click [OK]. The image is copied to the PC. Disconnecting the Camera from Your PC Windows XP 3 Turn your camera on. The ACDSee Device Detector screen appears automatically. If the ACDSee Device Detector screen does not appear, display and copy the images following the steps in "When the ACDSee Device Detector screen does not appear". [. . . ] If the ACDSee Device Detector screen does not appear, display and copy the images following the steps in "When the ACDSee Device Detector screen does not appear". · While communicating with your computer via a USB cable, the status lamp blinks green. · If there is no SD Memory Card in the camera, the images stored in the built-in memory will be transmitted to your PC. · Even if camera images are not transferred, they can be directly displayed on the computer from a camera connected to the computer. [. . . ]