User manual PENTAX PCK1500A

[. . . ] Do not try to use it as a navigation instrument for an aircraft, motor vehicle, personal navigation or any 3 other type of navigation, or for surveying. PENTAX will not be held liable for any damages caused by use of this camera for any of the purposes mentioned above. Hereby, PENTAX RICOH IMAGING CO. , LTD. , declares that this SG661 GPS Module/GYSFDMASA-P1 is in compliance with the essential requirements and other relevant provisions of Directive 1999/ 5/EC. For a full version of the Declaration of Conformity (DoC), please refer to http://www. pentax. jp/english. The CE Mark is a Directive conformity mark of the European Union. Utilities Guide for GPS Before using GPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] You can see the positions of images you shot on a map by using the provided software. Saving log files The camera receives information from GPS satellites regularly and saves it to the SD Memory Card as a log file in KML format. The log files can be imported to Google Earth or Google Maps or other programs that can read KML files on your computer and you can display your locations on their maps. Correct the clock using GPS information The camera corrects its clock automatically using time data received from GPS satellites. This manual describes how to use the Optio WG-2 GPS camera's GPS function and precautions when using it. Please read this manual before using the GPS function with this camera. 54565 R02BAB12 Printed in Indonesia 2 4 Using the GPS Record the GPS Information on Captured Images Preparation for Using GPS Function Set the [GPS On/Off] to [On] for receiving GPS information (latitude, longitude, altitude, date and time etc. ). When the GPS information is recorded on captured images (p. 6) and recorded to the camera as a log (p. 8), saved to the SD Memory Card as a log file (p. 10) or the camera corrects its clock automatically (p. 14), [GPS On/Off] need to be set to [On]. When [GPS On/Off] is set to [On], the received GPS information is recorded onto captured images. The following icons appear on the display. During receiving GPS information. [GPS On/Off] on the [GPS] setting is set to [On], and signals from GPS satellites are being received. Displaying the GPS information recorded on captured image Recording and Saving a Log Receives GPS information with interval and duration you have set and records it to the camera as a log. The recorded log can be saved to the SD Memory Card as a log file (KML format). Logging Duration MENU Cancel OK 6 Record log Stops log recording Stop Logging Interval 15sec. Logging Duration MENU OK Selecting [Record log] while recording a log displays a confirmation screen. Select [Stop] and press the 4 button to stop recording the log. OK Use the four-way controller (23) to select [Save], and press the 4 button. Discarding a Recorded Log Saves log data to memory card. Do not remove battery or card until complete Save Cancel OK OK Discards a recorded log without saving it to the SD Memory Card. 1 OK Use the four-way controller (23) to select [GPS] on the [WSetting] menu. Press the four-way controller (5). The [GPS] screen appears. 8 9 Use the four-way controller (23) to select [Logging Duration], and press the four-way controller (5). Use the four-way controller (23) to select the logging duration, and press the 4 button. Record log Starts log recording Start Logging Interval 15sec. Logging Duration MENU OK 7 Press the 4 button. Returns to the [GPS Logging] screen. · The logs are saved in the SD Memory Card only (you cannot save them in the built-in memory). · Up to 999 log files or to the capacity of the SD Memory Card can be saved. · The information saved in logs are latitude, longitude, altitude and date and time. Transfer the logs to your computer and use software that supports files in the KML format such as Google Earth or Google Maps to display the logs. 2 3 Saving a Recorded Log Saves the recorded log to the SD Memory Card as a log file (KML format). [. . . ] Transfer the logs to your computer and use software that supports files in the KML format such as Google Earth or Google Maps to display the logs. 2 3 Saving a Recorded Log Saves the recorded log to the SD Memory Card as a log file (KML format). The log files are saved in the [GPSLOG] folder under the root directory of the SD Memory Card. Use the four-way controller (23) to select [GPS Logging]. GPS GPS On/Off GPS Logging GPS Time Sync MENU On Off 1hr. OK 1 OK Cancel Use the four-way controller (23) to select [GPS] on the [WSetting] menu. Press the four-way controller (5). The [GPS] screen appears. 10 Use the four-way controller (23) to select [Start], and press the 4 button. Record log Starts log recording Start Logging Interval 15sec. Logging Duration 1hr. MENU OK 2 3 OK 4 5 6 Press the four-way controller (5). The [GPS Logging] screen appears. Use the four-way controller (23) to select [GPS Logging]. GPS GPS On/Off GPS Logging GPS Time Sync MENU Use the four-way controller (23) to select [Discard log data], and press the 4 button. A confirmation screen appears. On · Once you record a log, you cannot record a new log until you save the existing log to the SD Memory Card as a log file (p. 10) or discard it (p. 12). [. . . ]