User manual PENTAX PC 550

[. . . ] Images taken with the purpose of obtaining copyrights also cannot be used outside the scope of use of the copyright as laid out in the Copyright Act, and care should be taken here also. Regarding trademarks · PENTAX and Optio are trademarks of HOYA CORPORATION. · ArcSoft®, and its logo are either the registered trademark or trademark of ArcSoft Inc. · Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and other countries. [. . . ] (Sensitivity 80 - 800) 80 The lower the sensitivity, the less noise that affects the image. 200 400 800 1600 Higher sensitivity settings use faster shutter speeds in low light 3200 conditions to reduce camera shake, but the image may be affected by noise. 6400 3 Taking Pictures 114 1 2 3 4 Press the 3 button in A mode. The [A Rec. Mode] menu appears. Use the four-way controller (23) to select [Sensitivity]. Press the four-way controller (5). A pull-down menu appears. Use the four-way controller (23) to change the sensitivity. Rec. Mode Recorded Pixels White Balance AF Setting AE Metering Sensitivity EV Compensation MENU 1/3 12M Auto 80 100 200 400 OK Cancel OK 5 6 Press the 4 button. The setting is saved. Press the 3 button. The camera returns to capture status. · When the sensitivity is set to 3200 or 6400, the number of recorded pixels is fixed at f (2592×1944)/W (2592×1464). · When set to 9 (Green) or C (Movie) mode, only Auto (sensitivity 80 - 800) is available. · When set to c (Digital SR) mode, only Auto (sensitivity 80 - 6400) is available. · When set to S (Fireworks) mode, the sensitivity is fixed at its minimum setting. · If you change the [Sensitivity] setting frequently, you can save time by assigning it to the Green button (p. 120). Saving the Sensitivity setting 1p. 128 3 Taking Pictures Setting Blink Detection This specifies whether Blink Detection function works when you use the Face Detection function. Press the four-way controller (5). A pull-down menu appears. 119 4 Use the four-way controller (23) to select the Date Imprint details. Choose from [Date], [Date & Time], [Time] or [Off]. Rec. Mode Memory Green Button Sharpness Saturation Contrast Date Imprint MENU 3/3 Date Date & Time Time Off OK Cancel OK 5 3 Taking Pictures · · · · · · · 120 Press the 4 button. The setting is saved. 6 Press the 3 button. The camera returns to capture status. · The date and/or time imprinted with the Date Imprint function cannot be deleted. · Note that if the printer or the image editing software is set to print the date and the images to be printed already have the date and/or time imprinted, the imprinted dates and/or times may overlap. · O appears on the display in A mode when [Date Imprint] is set. · The date and/or time are imprinted on the picture with the display style set in the [Date Adjustment] screen (p. 47). Calling Up a Specific Function You can assign a function to the Green button and recall it quickly by simply pressing the Green button. This is useful for going straight to the setting screens of frequently used functions. The following functions can be assigned to the Green button: 9 (Green) Mode Recorded Pixels White Balance Focusing Area AE Metering Sensitivity EV Compensation · · · · · · Highlight Correction Shadow Correction Sharpness Saturation Contrast Voice Recording · The Green button setting can be returned to its default setting by selecting [Reset] on the [W Setting] menu. · The functions other than 9 (Green) mode and Voice Recording can be set in the usual manner on the [A Rec. · You cannot save different settings for the same function on the Green button and on the [A Rec. Mode] menu. To Assign a Function to the Green Button 1 2 3 4 Press the 3 button in A mode. The [A Rec. Mode] menu appears. 3 Taking Pictures Use the four-way controller (23) to select [Green Button]. [. . . ] Each product marketed is identical to the representative unit tested and found to be compliant with the standards. Records maintained continue to reflect the equipment being produced can be expected to be within the variation accepted, due to quantity production and testing on the statistical basis as required by 47CFR §2. 909. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. The above named party is responsible for ensuring that the equipment complies with the standards of 47CFR §15. 101 to §15. 109. Product Name: PENTAX Digital Still Camera Model Number: Optio I-10 Contact person: Customer Service Manager Date and Place: January, 2010, Colorado 9 Appendix 261 Information for Users on Collection and Disposal of Old Equipment and Used Batteries 1. [. . . ]