User manual PENTAX OPTIO LS465

[. . . ] Images taken with the purpose of obtaining copyrights also cannot be used outside the scope of use of the copyright as laid out in the Copyright Act, and care should be taken here also. To users of this camera There is a possibility that recorded data may be erased or that the camera may not function correctly when used in surroundings such as installations generating strong electromagnetic radiation or magnetic fields. The liquid crystal panel used in the LCD display is manufactured using extremely high precision technology. Although the level of functioning pixels is 99. 99% or better, you should be aware that 0. 01% or fewer of the pixels may not illuminate or may illuminate when they should not. [. . . ] To stop recording, press the shutter release button again. The optical zoom function (3X) can be activated before you start recording the movie clips The digital zoom function can be activated before and during the recording. EN-41 PLAYING BACK AND DELETING IMAGES Viewing Images You can display the still images one by one. Rotate the mode dial to , , , , , or and turn your camera on by pressing the power switch. To view the next image, press the four-way controller ( ). For protected images/movie clips, mark will be displayed. (Refer to the section in this manual titled "Protecting Images/Movie Clips" (EN-48) for further details. ) For images selected for printing with DPOF setting, mark will be displayed. (Refer to the section in this manual titled "Setting the DPOF" (EN-53, 54) for further details. ) If there is no image stored in the internal memory or on the SD Memory Card, [No image] message will appear on the LCD monitor. You cannot enter the Playback mode from the Setup mode. EN-42 Magnifying Images While reviewing your images, you may enlarge a selected portion of an image. The zoom factor displayed on the screen shows the current magnification ratio. To view different portions of the images, press the four-way controller ( ) to adjust the display area. 1. 5X The magnification factors range from 1. 5X to 4X (within 6 stages: 1. 5X, 2. 0X, 2. 5X, 3. 0X, 3. 5X and 4. 0X). Movies cannot be magnified during playback. EN-43 Thumbnail Display This function allows you to view 9 thumbnail images on the LCD monitor simultaneously so you may search for a particular image. (Refer to the section in this manual titled "Protecting Images/ Movie Clips" (EN-48) for further details. ) 3. Use the four-way controller ( ) to move the cursor to select the image to be displayed at regular size. [All Images]: Protect all images/movies (at once). Playback1 Slideshow Protect DPOF Playback2 Exit : Protect This Image All Images Select : Cancel : Select : EN-48 5. Use the four-way controller ( ) to select [Protect], then press the button to confirm. If you wish to cancel the protect function of a protected image, select [Unprotect]. Cancel : This Image Protect Unprotect Select : Even protected images and movies will be deleted by formatting the SD Memory Card or the built-in memory. EN-49 Playing Back Still Images/Movie Clips on TV You can also playback your images on a TV screen. Before connecting to any device, make sure to select NTSC/PAL system to match the video output system of the video equipment you are going to connect to the digital camera, then turn off all devices to be connected. Connect one end of the video cable to the PC/VIDEO terminal of the digital camera, making sure the shapes of both terminals match each other. The method of operation is the same as playing back still images and movie clips on the digital camera. PC/VIDEO terminal The sound recorded with movie clips can only be played back on a computer. EN-50 EDITING AND PRINTING IMAGES Changing Image Resolution and Quality You can change the image resolution and quality of a captured image. Press the four-way controller ( ) to select [Playback2] and press ( ) to select [Resize] and press the button. Use the four-way controller ( ) to select the desired setting, then press the button to confirm. To change the image quality, select [Quality Change] in the step 3 above and select the desired setting in the step 4 and press the button to confirm. Playback1 Resize Quality Change Image Copy Playback2 Exit : Select : Resize 2304 x 1728 1600 x 1200 640 x 480 Cancel : Select : You can only choose a smaller resolution and a lower quality. Movie cannot be resized. EN-51 Copying Files You can copy image files from the built-in memory to the SD Memory Card. This function can only be selected when a card has been inserted in the camera. [. . . ] Always obtain a quotation for the service charge, and only after you accept the quoted service charge, instruct the service station to proceed with the servicing. * * This warranty policy does not affect the customer's statutory rights. The local warranty policies available from PENTAX distributors in some countries can supersede this warranty policy. Therefore, we recommend that you review the warranty card supplied with your product at the time of purchase, or contact the PENTAX distributor in your country for more information and to receive a copy of the warranty policy. The CE Mark is a Directive conformity mark of the European Union. EN-88 Information on Disposal for users 1. In the European Union If your product is marked with this symbol, it means that used electrical/electronic products should not be mixed with general household waste. [. . . ]