User manual PENTAX OPTIO E60

[. . . ] Digital Camera Operating Manual To ensure the best performance from your camera, please read the Operating Manual before using the camera. Thank you for purchasing this PENTAX Digital Camera. Please read this manual before using the camera in order to get the most out of all the features and functions. Keep this manual safe, as it can be a valuable tool in helping you to understand all the camera capabilities. Regarding copyrights Images taken using this PENTAX Digital Camera that are for anything other than personal enjoyment cannot be used without permission according to the rights as specified in the Copyright Act. Please take care, as there are cases where limitations are placed on taking pictures even for personal enjoyment during demonstrations, performances or of items on display. Images taken with the purpose of obtaining copyrights also cannot be used outside the scope of use of the copyright as laid out in the Copyright Act, and care should be taken here also. [. . . ] The picture is taken approximately two seconds after the shutter release button is pressed. 1 2 Press the four-way controller (2) in the capture mode. Use the four-way controller (453) to select g or Z and press the 4 button. The camera is ready to take the picture using the self-timer. Drive Mode Self-timer MENU Cancel OK 3 4 Press the shutter release button halfway. OK The focus frame on the display turns green if the subject is in focus. Press the shutter release button fully. The picture is taken ten seconds or two seconds later. · Focusing may be compromised if you move the camera while the self-timer lamp is blinking when taking still pictures. · Z cannot be selected for default setting of (Green) for the first time. Select Z in another shooting mode and then switch the shooting mode to . · In d (Movie), recording will start after ten seconds (or two seconds). · Press the shutter release button halfway while the self-timer is running to stop the countdown. Press it down fully to restart the countdown. 85 Shutter release button Four-way controller 4 button Available in bRA q< \4 DAY Taking a Series of Pictures You can take several pictures continuously. 4 Taking Pictures 86 1 Continuous Shooting f 16-frame shooting Each time a picture is taken, the image is saved in the memory before the next image is taken. Takes 16 images per 2 seconds with one press of the shutter release button. The Recorded Pixels per one image is fixed at m. 1 2 Press the four-way controller (2) in the capture mode. Use the four-way controller (45) to select 1 or f and press the 4 button. The camera is ready to take a series of pictures. Drive Mode Continuous Shooting MENU Cancel OK 3 4 Press the shutter release button halfway. OK The focus frame on the display turns green if the subject is in focus. Press the shutter release button fully. Continuous Shooting : Pictures are taken continuously until you release the shutter release button. 16-frame shooting : 16 images are taken per 2 seconds with one press of the shutter release button. · In Continuous Shooting and 16-frame shooting, the flash does not discharge. · The 16-frame shooting is not available in , b, A, , 4, O, A or Y. · In d (Movie), the Continuous Shooting and the 16-frame shooting are not available. · In Continuous Shooting and 16-frame shooting, the focus and EV Compensation are fixed with the first image. · In Continuous Shooting, you can continue shooting until the memory capacity of the SD Memory Card or built-in memory reaches full. · The interval of Continuous Shooting varies depending on the Recorded Pixels and the Quality Level you have selected. · The images taken with the 16-frame shooting function will be printed as a single image in 4 × 4 rows of the 16 images. · When you play back the images taken with the 16-frame shooting function, they will be displayed as follows. - When played back on the camera, 16 images are continuously played back like a movie. You can save one of a series of images taken with the 16-frame shooting function as a single image. [. . . ] Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. The above named party is responsible for ensuring that the equipment complies with the standards of 47CFR §15. 101 to §15. 109. Product Name: PENTAX Digital Still Camera Model Number: Optio E60 9 Appendix 174 Contact person: Customer Service Manager Date and Place: August, 2008, Colorado Information on disposal for users 1. In the European Union If your product is marked with this symbol, it means that used electrical/electronic products should not be mixed with general household waste. Used electric/electronic equipment must be treated separately and in accordance with legislation that requires proper treatment, recovery and recycling of these products. [. . . ]