User manual PENTAX K20D

[. . . ] PENTAX Corporation 2-36-9, Maeno-cho, Itabashi-ku, Tokyo 174-8639, JAPAN (http://www. pentax. co. jp/) PENTAX Europe GmbH Julius-Vosseler-Strasse, 104, 22527 Hamburg, (European Headquarters) GERMANY (HQ - http://www. pentaxeurope. com) (Germany - http://www. pentax. de) PENTAX U. K. Limited PENTAX House, Heron Drive, Langley, Slough, Berks SL3 8PN, U. K. 204 95106 Argenteuil Cedex, FRANCE (http://www. pentax. fr) PENTAX Italia S. r. l. Via Dione Cassio 15, 20138 Milano, ITALY (http://www. pentaxitalia. it) PENTAX (Schweiz) AG Widenholzstrasse 1, 8304 Wallisellen, Postfach 367, 8305 Dietlikon, SWITZERLAND (http://www. pentax. ch) PENTAX Scandinavia AB P. O. [. . . ] Take your finger off the shutter release button to stop. · If the focus mode is set to l (Single mode), focus is locked on the first focus position and pictures are taken at the set interval. · Focusing is continuously active during continuous shooting when the focus mode is set to k (Continuous mode). · The shutter cannot be released until charging is complete when using the built-in flash. You can set the camera to enable shutter release before the built-in flash is ready in the [A Custom Setting] menu. (p. 137) · You can also use the remote control for continuous shooting. (p. 125) · Select a setting other than gh in the Drive Mode options screen to cancel continuous shooting. The setting is canceled when the camera is turned off if [Drive Mode] in [Memory] of the [A Rec. Mode] menu (p. 236) is set to P (Off). 119 Burst Shooting You can take pictures continuously at approximately 21 frames per second. In this mode, images are saved with JPEG Quality set to Y (1536×1024) regardless of the save format setting (p. 156). Mode] menu is used. 1 2 Press the { button. The Fn menu appears. Press the four-way controller (2) and use the four-way controller (45) to select j. Drive Mode Burst Shooting OK 4 Shooting Functions OK 3 4 5 Press the 4 button. The camera is ready to take pictures continuously. Press the shutter release button halfway. The autofocus system operates. The focus indicator ] appears in the viewfinder when focused. Press the shutter release button fully. Pictures are taken continuously while the shutter release button is fully pressed until the camera buffer memory is full (JPEG Quality C: maximum of approximately 115 pictures). The focus is locked during shooting. · The mirror raises during shooting and Instant Review is displayed continuously on the monitor. · The flash is turned off and the | button operation is unavailable in this mode. · Select a setting other than j in the Drive Mode options screen to cancel burst shooting. The setting is canceled when the camera is turned off if [Drive Mode] in [Memory] of [A Rec. Mode] menu (p. 236) is set to P (Off). 120 Interval Shooting During interval shooting, pictures are taken at a set interval from a set time. 1 2 3 4 Shooting Functions Select [Interval Shooting] in the [A Rec. Use the four-way controller (45) to select O (On). Interval Shooting Interval Number of Shots Start Trigger Start Time MENU 00 : 00 ' 01 " 1img Now Cancel OK OK 4 Use the four-way controller (3) to select [Interval]. When taking two or more pictures, set the wait time until the next picture is taken. Use the four-way controller (45) to select the number of hours, minutes, and seconds, and press the four-way controller (23) to set the time. You can set up to 24 hours, 0 minutes, and 0 seconds. 5 Use the four-way controller (3) to select [Number of Shots]. Set the number of shots to be taken. Press the four-way controller (5) and use the four-way controller (23) to select the number of shots to be taken. You can select between 1 and 99 shots. 6 Use the four-way controller (3) to select [Start Trigger]. Set the time when the first picture is taken. Press the four-way controller (5) and use the four-way controller (45) to select [Now] or [Set Time]. Now Set Time Shooting starts immediately. [. . . ] Changes or modifications not approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ]