User manual PENTAX K-R

[. . . ] For optimum camera performance, please read the Operating Manual before using the camera. Please read this manual before using the camera in order to get the most out of all the features and functions. Keep this manual safe, as it can be a valuable tool in helping you to understand all the camera's capabilities. Lenses you can use In general, lenses that can be used with this camera are DA, DA L, D FA and FA J lenses and lenses that have an s (Auto) position on the aperture ring. [. . . ] For shooting multiple pictures, pictures are taken at the interval set in Step 2. After the set number of pictures is taken, the camera returns to normal Capture mode. To cancel the Interval Shooting, press any button on the back of the camera or press the shutter release button and the 3 button to display the exit confirmation screen, and then use the four-way controller (23) to select [Exit] and press the 4 button. You can also exit the Interval Shooting by turning the main switch off or turning the mode dial. If the subject is not in focus with the focus mode set to l (Single mode) or if the [Interval] setting is too short and the previous image processing cannot be completed before taking the next picture, no picture may be taken. Although each shot taken is displayed on the monitor with Instant Review, they cannot be enlarged or deleted. Interval Shooting is canceled when the SD Memory Card has no more available space. 281) turns the camera off during Interval Shooting, the camera automatically turns on again when the shooting time approaches. It is recommended to use the AC adapter kit K-AC109 (optional) when using the Interval Shooting over a long period of time. - when the capture mode is set to C (Movie), or Z (Night Scene HDR) of H (Scene) mode - when Digital Filter, HDR Capture or Cross Processing is set · When Multi-exposure is set, the following functions are not available. Press the four-way controller (5) and use the four-way controller (23) to select the number of shots. Use the four-way controller (23) to select [Auto EV Adjustment] and use the four-way controller (45) to select O or P. When set to O(On), the exposure is adjusted automatically according to the number of shots. The composite picture is displayed in Instant Review each time the shutter release button is pressed. Press the K/i button during Instant Review to discard pictures taken up to that point and take pictures again from the first frame. The pictures are saved when the set number of shots is taken, and then the [Multi-exposure] screen appears again. If any of the following operations are performed while shooting, the pictures that have been already taken are saved and Multi-exposure is ended. - when the Q button, 3 button, four-way controller (234) or M button is pressed - when the mode dial is turned - when Exposure Bracketing is set · When shooting in Multi-exposure mode using Live View, a semi-transparent composite image of the pictures taken is displayed. Filter Name Effect Parameter Shading Level: +1 to +3 Toy Camera For taking pictures that look as Blur: +1 to +3 if taken with a toy camera. Tone Break: Red/Green/Blue/ Yellow For taking pictures with the look of old photos. Toning: -3 to +3 Frame Composite: None/Thin/ Medium/Thick +1 to +5 Extracted Color 1: Red/ Magenta/Blue/Cyan/Green/ Yellow Extract Color For extracting two specific colors and making the rest of the image black and white. Extractable Range of Color 1: -2 to +2 Extracted Color 2: Red/ Magenta/Blue/Cyan/Green/ Yellow/OFF Extractable Range of Color 2: -2 to +2 Soft *1 For taking pictures with a soft focus throughout the image. [. . . ] Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ]