User manual PENTAX EI200

[. . . ] These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does not cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. [. . . ] To change the setting, press the Mode button a number of times until the desired one is selected. Mode Auto Red-Eye Flash ON Flash OFF Description Flash is enabled automatically in low light conditions Auto Mode with Pre-Flash to reduce red eye effect Flash is always enabled Flash is always disabled 5. The cursor returns to the CAPTURE MENU. This setting is reset to 0. 0 when the camera power is off. The setting is conserved even if the camera power is off. The flash effective range is 0. 4m - 2m (1. 3feet - 6feet). How to adjust the White Balance? To adjust the White Balance, perform the following: 1. Select the WHITE BALANCE item by the arrow buttons ( / ) and then press the OK button to confirm. Use the arrow buttons ( / ) to select the desired white balance setting. The cursor returns to the CAPTURE MENU. This setting is reset to AUTO when the camera power is off. How to set the Self-Timer? To use the Self-Timer function, perform the following: 1. After 10 seconds, an image is captured and the timer will turn itself off. The Self-Timer is located in front of the camera, and it is designed to count down for 10 seconds. In the first 7 seconds, the indicator lights up and then blinks rapidly for the last 3 seconds. How to set the OSD (On-Screen Display) language? To s e t t h e O S D l a n g u a g e , p e r f o r m t h e following: 1. Select the LANGUAGE item by the arrow buttons ( / ) and then press the OK button to confirm. The cursor returns to the SETUP MENU. How to format the Internal Memory or CF (CompactFlash) card? Perform the following procedures: 1. Select the FORMAT CARD item by the arrow buttons ( / ) and then press the OK button to confirm. Press the OK button again to re-format the internal memory or CF card. Also using the arrow buttons ( / ) to view the fragment picture in the "Z" type tracing sequentially. 17 SETUP Mode In SETUP mode, users can customize their own preferences according to the actual requirements. SETUP Menu Switch the Operating Mode Dial to SETUP, the Setup menu appears. The menu contains the following items: LANGUAGE: Sets the OSD menu language. They are English, French, German, Spanish, Portuguese and Traditional Chinese. Select the item by the arrow buttons ( / ) and then press the OK button to confirm. The cursor returns to the SETUP menu automatically when the change is made. You may choose either to turn on or off (default=on) the sound effects while capturing an image or pressing a button or an alert is produced by the camera. Select the item by the arrow buttons ( / ) and then press the OK button to confirm. The cursor returns to the SETUP menu automatically when the change is made. DATE/TIME: Displays the date and time information. When the camera is used for the 1st time or the batteries are replaced, you may need to have the correct date/time setting. The cursor skips to the last field and the first item (Month) in this field is selected. Use the arrow buttons ( / ) to change the number or press the OK button to proceed to the next item. [. . . ] You may press the button in CAPTURE mode for image capturing, processing and storing. Before photo shooting, please make sure that your camera has available free space for image storage and there is appropriate light for a successful image capturing. PC: Transfer images to PC SETUP: Change camera settings Battery Power Indicator You may check the battery status by the battery power indicator on the LCD display. Battery icon with no bars on: There is no battery power remaining, the batteries need to be replaced. The camera will be forced to power it off at once. Self-Timer Button The Self-Timer button is active only in CAPTURE mode. [. . . ]