User manual PENTAX DATA K

[. . . ] The PENTAX Software Installer screen appears automatically, but no action is required at this stage. 3 With your camera turned off, connect it to your PC using the USB cable. Your PC will automatically detect the camera as new hardware and the Wizard screen will appear. Make sure that you select [Search for the best driver for your device. [. . . ] (Recommended). ] for the search method and check only [CD-ROM drive] for the search location when installing. If the proper versions of Quick Time and DirectX are not installed on your PC: A message, such as the one shown on the right, appears when ACDSee for PENTAX 2. 0 is run. Click [Close] and install QuickTime and DirectX from the PENTAX Software Installer screen. Macintosh Step 2 Windows, Macintosh Step 3 Installing the Software Install the image viewing/editing software (ACDSee for PENTAX 2. 0). · Windows Media Player 7. 1 or later must be installed in your PC to install ACDSee for PENTAX 2. 0. · When multiple accounts have been setup in Windows 2000 or Windows XP, log on with an account that has administrative rights before installing the software. Installing the Software Install the image viewing/editing software (ACDSee for PENTAX). Setting Up Your Digital Camera Setting the USB Connection Mode to [PC] 1 2 3 4 5 6 Press the 3 button. Press the 4 button. If the digital camera is connected to your PC in [PictBridge] USB Connection mode, the images cannot be transferred. Disconnect the USB cable from your camera and PC to set the USB Connection mode to [PC], and then reconnect the USB cable. Setting Folder Name USB Connection Video Out Auto LCD Dimmer Auto Power Off MENU Cancel 1 2 Turn your PC on. Insert the CD-ROM (S-SW48) into the CD-ROM drive. The PENTAX Software Installer screen appears. If the PENTAX Software Installer screen does not appear Display the PENTAX Software Installer screen following the steps below. 3) Double-click the [Setup. exe] icon. 1 2 3 4 5 Turn your Macintosh on. Double-click the [Install ACDSee] icon. The PENTAX Software Installer screen appears. Double-click the [Master Installer] icon to display the PENTAX Software Installer screen. 2/3 Standard PC PictBridge 3min OK Choose a language from the displayed screen. The ACDSee for PENTAX installer screen appears. OK 3 Choose a language from the displayed screen. The software selection screen appears. 6 Click [Install] for ACDSee for PENTAX. The setup screen appears. For details on how to use these functions, see the help pages. 3 10 Specify the destination folder. 11 Click [OK]. The image is copied to the PC. 2 Disconnecting the Camera from Your PC 1 Double-click the in the task bar. [Safely Remove Hardware] icon ACDSee Browser Interface 3 Turn your camera on. The Device Detector screen appears automatically. If the Device Detector screen does not appear, display and copy the images following the steps in "When the Device Detector screen does not appear". The self-timer lamp lights while the camera is connected to a PC with the USB cable. 2 The Safely Remove Hardware screen appears. Select [USB Mass Storage Device] and click [Stop]. The Stop a Hardware device screen appears. Macintosh Step 5 Using ACDSee for PENTAX ACDSee for PENTAX lets you view, edit, organize, search for, share, and print images. Transferring Images 4 Confirm that [Acquire images from the device with ACDSee] is checked and click [OK]. 3 4 Select [USB Mass Storage Device] and click [OK]. A message appears indicating that the hardware can be safely removed. Starting ACDSee for PENTAX 1 Double-click the [ACDSee] folder inside the [Applications] folder. Status bar Displays information and properties for the selected file. ACDSee Browser Interface 1 2 3 4 8 Click [Finish]. The ACDSee for PENTAX 2. 0 Browser starts. 3 Using the Help Pages Refer to the help pages for a more detailed description of how to use each function. 5 6 Turn your camera on. The camera is recognized as [NO_NAME] ([untitled] in Mac OS 9) on the desktop. · If the SD Memory Card has a volume label, the volume label name appears instead of [NO_NAME]. A new unformatted SD Memory Card may show the manufacturer name or model number. · The self-timer lamp lights while the camera is connected to a Macintosh with the USB cable. 1 2 Click the [?] icon at the top right of the screen. The help screen appears. Double-click the desired topic. Menu bar You can access the various menu commands. Toolbar Provides quick access to shortcuts for frequently used tasks and functions. When you browse a folder, the contents of the folder appear in the File List pane. [. . . ] When you browse a folder, the contents of the folder appear in the File List pane. Preview pane Displays a preview of the image or media file currently selected in the File List pane. You can change the size of the preview image or play back the media file. File List pane Displays the contents of the currently selected folder or the results of the most recent search, in other words the file or folder that matches the search item. [. . . ]