User manual PENTAX AF540FGZ FLASH

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PENTAX AF540FGZ FLASH. We hope that this PENTAX AF540FGZ FLASH user guide will be useful to you.


PENTAX AF540FGZ FLASH : Download the complete user guide (2278 Ko)

Manual abstract: user guide PENTAX AF540FGZ FLASH

Detailed instructions for use are in the User's Guide.

[. . . ] AUTO ZOOM ELECTRONIC FLASH UNIT OPERATING MANUAL Please read this operating manual carefully first for proper use. Thank you for purchasing the PENTAX Auto-flash AF540FGZ. In addition to easy daylight sync photography with TTL auto, the AF540FGZ also allows wireless TTL auto (P-TTL auto) photography and high-speed sync. It is a clip-on type flash which enables accurate focus adjustments even in dark locations with built-in AF-assist spotbeam. PENTAX is a trademark of HOYA CORPORATION. FOR THE SAFE USE OF YOUR FLASH UNIT Although we have carefully designed this flash unit for safe operation, please be sure to follow precautions given on page 2. WARNING This symbol indicates that violating this item could cause serious personal injuries. CAUTION This symbol indicates that violating this item could cause minor or medium personal injuries, or material losses. is a symbol emphasizing a warning. 1 WARNING The flash contains electronic circuits that operate at high voltages. [. . . ] Slide down the setting switch to the (yellow dot) to display the channel on the LCD panel. Press the channel button (CH) and select the same channel that the flash unit attached to the camera has been set to. The two flash units must be set to the same channel, otherwise the separated flash unit will not discharge. 2 (Photographing) 3 Confirm that both flash units are fully charged, and take the photograph. A lamp on the wireless flash unit will blink. 45 Wireless High-Speed Sync Photography (Using the AF540FGZ in Combination with a Built-in Flash Unit) 1 Firstly, set the wireless mode and channel of the AF540FGZ, and register them on the camera. Turn the camera off and then attach the AF540FGZ to the hot shoe of the camera. Press the wireless mode button (M/C/S) the number of times required to display SLAVE on the LCD panel. You cannot set the flash unit to SLAVE while the exposure metering timer is on (while information relating to aperture etc. Slide down the setting switch to the (yellow dot) to display the channel on the LCD panel. Slide the setting switch back up to the (white dot). 46 Next, remove the flash unit from the camera and place it in the desired position. Press the flash mode button (MODE) to display (P-TTL) if the flash mode was set to the modes other than P-TTL. 2 3 4 5 6 When you turn the camera on and press the shutter release button halfway down, the channel is registered on the camera. If the shutter speed is the same or slower than the X-sync speed of the camera, the flash will be set to P-TTL mode, and when it is faster than Xsync speed, the flash will be set to high-speed sync mode. Confirm that the AF540FGZ and built-in flash unit are fully charged, and take the photograph. Refer to camera's operating manual for the operation of the camera. 7 Set the zoom position. (Refer to page 21) Set the zoom position with (M. Zoom) regardless of the lens you use. Enable the built-in flash unit of the camera and display ( ) on the LCD panel. Set the sync mode switch of the wireless flash unit to leading curtain sync ( ). Set the exposure mode of the camera to manual exposure and the shutter speed faster than Xsync speed. 47 (Using the AF540FGZ in Combination with another AF540FGZ) 1 Firstly, set the wireless mode and channel of the AF540FGZ attached to the camera, and register the channel on the camera. Turn the camera off and then attach the AF540FGZ to the hot shoe of the camera. Set the power switch of the flash unit to (WIRELESS). Press the wireless mode button (M/C/S) the number of times required to select CONTROL or MASTER. CONTROL: For using the flash unit attached to the camera as the control flash. Slide down the setting switch to the (yellow dot) to display the channel on the LCD panel. Press the channel button (CH) and select a channel from 1CH to 4CH. 48 Next, set the channel of the separated (wireless) flash unit to the same channel as the flash unit attached to the camera. Press the wireless mode button (M/C/S) the number of times required to display SLAVE on the LCD panel. Slide down the setting switch to the (yellow dot) to display the channel on the LCD panel. [. . . ] Therefore, we recommend that you review the warranty card supplied with your product at the time of purchase, or contact the PENTAX distributor in your country for more information and to receive a copy of the warranty policy. For customers in the USA STATEMENT OF FCC COMPLIANCE This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE PENTAX AF540FGZ FLASH




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PENTAX AF540FGZ FLASH will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.