User manual PENTAX AF201SA FLASH

[. . . ] Images taken with the purpose of obtaining copyrights also cannot be used outside the scope of use of the copyright as laid out in the Copyright Act, and care should be taken here also. Regarding trademarks · PENTAX, Optio and smc PENTAX are trademarks of HOYA CORPORATION. · Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and other countries. Windows Vista is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. [. . . ] · When set to S (Fireworks) mode, the sensitivity is fixed at its minimum setting. · If you change the [Sensitivity] setting frequently, you can save time by assigning it to the Green button (p. 117). Saving the Sensitivity setting 1p. 123 3 Taking Pictures Setting Blink Detection This specifies whether Blink Detection works when you use the Face Recognition function. The default setting is O (On). 1 2 Press the 3 button in A mode. The [A Rec. Mode] menu appears. Use the four-way controller (23) to select [Blink Detection]. 111 3 Use the four-way controller (45) to select O (On) or P (Off). Blink Detection function works. Mode 2/3 EV Compensation 0. 0 Movie Blink Detection Digital Zoom Instant Review 1sec. Memory MENU Exit 4 3 Taking Pictures 112 Press the 3 button. The camera returns to capture status. Blink Detection 1p. 67 Setting Pixel Track SR You can set this function to correct for camera shake during shooting. If you set Pixel Track SR, the camera automatically corrects any camera shake in the images you shot. The default setting is [Auto]. 1 2 3 4 Press the 3 button in A mode. The [A Rec. Mode] menu appears. Use the four-way controller (23) to select [Pixel Track SR]. Press the (5) button. A pull-down menu appears. Use the four-way controller (23) to select [Auto] or [Off]. Auto Off Automatically corrects for camera shake. · The functions other than 9 (Green) Mode and Voice Recording can be set in the usual manner on the [A Rec. · You cannot save different settings for the same function on the Green button and on the [A Rec. Mode] menu. To Assign a Function to the Green Button 1 2 3 Press the 3 button in A mode. The [A Rec. Mode] menu appears. Use the four-way controller (23) to select [Green Button]. Press the four-way controller (5). A pull-down menu appears. 117 4 Use the four-way controller (23) to choose a function and press the 4 button. Green Button Q 9Green Mode Recorded Pixels White Balance Focusing Area AE Metering Sensitivity OK MENU Cancel OK 5 3 Taking Pictures 118 Press the 3 button. The selected function is assigned to the Green button. To Use the Green Button 1 2 Press the Green button in A mode. The function assigned to the Green button is called up. Use the four-way controller (45) to change the settings and press the 4 button. The camera returns to capture status. EV Compensation 0. 0 If a function other than the 9 (Green) mode has been assigned to the Green button, the camera returns to the original screen if no operation is performed for 1 minute after the Green button is pressed. Recording Movies Recording a Movie This mode enables you to record movies. Sound is recorded at the same time. Zoom lever Shutter release button Four-way controller 4 button 3 Taking Pictures 1 2 Press the four-way controller (3) in A mode. The Capture Mode Palette appears. Use the four-way controller (2345) to select C (Movie). Movie 1/2 For recording movies MENU Cancel OK OK 3 Press the 4 button. C (Movie) mode is selected and the camera returns to capture status. 1 23 07:34 The following information appears on the display. 1 Movie mode icon 2 Recording indicator (blinks during recording) 3 Remaining recordable time 4 Focus frame (does not appear during recording) 5 Movie shake reduction function icon 02/02/2009 14:25 14 :25 5 4 119 You can change the captured area by turning the zoom lever to the left or right. Left (w) Widens the area that is captured by the camera. 4 3 Taking Pictures 120 Press the shutter release button fully. Recording starts. You can continue recording until the built-in memory or the SD Memory Card is full, or the size of the recorded movie reaches 2 GB. 5 Press the shutter release button fully. Recording stops. Playing Back a Movie 1p. 127 · The flash does not discharge in C (Movie) mode. · When the focus mode is set to \(Manual Focus), you can adjust the focus before recording starts. · You can use the optical zoom only before recording, while the digital zoom is available both before and during recording. [. . . ] Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. The above named party is responsible for ensuring that the equipment complies with the standards of 47CFR §15. 101 to §15. 109. Product Name: PENTAX Digital Still Camera Model Number: Optio P70 Contact person: Customer Service Manager Date and Place: February, 2009, Colorado 9 Appendix 243 Information for Users on Collection and Disposal of Old Equipment and Used Batteries 1. In the European Union These symbols on the products, packaging and/or accompanying documents mean that used electrical and electronic equipments and batteries should not be mixed with general household waste. Used electrical/electronic equipments and batteries must be treated separately and in accordance with legislation that requires proper treatment, recovery and recycling of these products. [. . . ]