User manual PENTAX AF201SA

[. . . ] Images taken with the purpose of obtaining copyrights also cannot be used outside the scope of use of the copyright as laid out in the Copyright Act, and care should be taken here also. Regarding trademarks · PENTAX and Optio are trademarks of HOYA CORPORATION. · ArcSoft, and its logo are either the registered trademark or trademark of ArcSoft Inc. · Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and other countries. [. . . ] Use the four-way controller (45) to select the EV value. To brighten, select a positive (+) value. You can choose the EV setting in the range of ­2. 0 EV to +2. 0 EV in 1/3 EV steps. Rec. Mode 1/3 3 Recorded Pixels White Balance AWB Focusing Area AE Metering Sensitivity Auto EV Compensation 0. 0 MENU Exit 4 Press the 3 button. The camera returns to capture status. · When the histogram is displayed in still picture capture mode/playback mode, you can check the exposure (p. 26). · The EV compensation function cannot be used in 9 (Green) or b (Auto Picture) mode. · If you change the [EV Compensation] setting frequently, you can save time by assigning it to the Green button (p. 107). Saving the EV Compensation value setting 1p. 113 Correcting the Brightness (D-Range Setting) Expands the dynamic range and enables a more ample gradation expression, and reduces the occurrence of overexposed and underexposed areas. Highlight Correction adjusts the overexposed areas and Shadow Correction adjusts the underexposed areas. 1 2 3 4 Press the 3 button in A mode. The [A Rec. Mode] menu appears. Use the four-way controller (23) to select [D-Range Setting]. Press the four-way controller (5). The [D-Range Setting] screen appears. 3 Taking Pictures Use the four-way controller (23) to select [Highlight Correction] or [Shadow Correction]. D-Range Setting Highlight Correction Shadow Correction MENU 5 6 Use the four-way controller (45) to select O (On) or P (Off). The D-Range Setting icon appears on the display. 38 P Q O When [Highlight Correction] is set to O When [Shadow Correction] is set to O When [Highlight Correction] and [Shadow Correction] are both set to O 03/03/2011 14:25 · When [Highlight Correction] is set to O, the minimum sensitivity is ISO 125. · If you change the [Highlight Correction] or [Shadow Correction] setting frequently, you can save time by assigning it to the Green button (p. 107). Press the four-way controller (5). A pull-down menu appears. 99 4 Use the four-way controller (23) to change the sensitivity. Rec. Mode Recorded Pixels White Balance Focusing Area AE Metering Sensitivity EV Compensation MENU Cancel 1/3 Auto 64 100 200 400 OK OK 5 3 Taking Pictures Press the 4 button. The setting is saved. 6 Press the 3 button. The camera returns to capture status. · When the sensitivity is set to 3200 or 6400, the number of recorded pixels is fixed at f (2592×1944). · In 9 (Green) mode or when recording a movie, only [Auto] (sensitivity 64 - 800) is available. · In c (Digital SR) mode, only [Auto] (sensitivity 64 - 6400) is available. · In S (Fireworks) mode, the sensitivity is fixed at the minimum value. · If you change the [Sensitivity] setting frequently, you can save time by assigning it to the Green button (p. 107). Saving the Sensitivity setting 1p. 113 Switching the Face Detection Function The S1 comes with a Face Detection function that spots the faces in your shot and automatically adjusts the focus and exposure for the faces. It will automatically release the shutter when people are smiling, or if anyone blinked, it will tell you that so you can take the shot again until it is perfect. The default setting is [On] for [Face Detection] and O (On) for [Blink Detection]. 1 2 100 Press the 3 button in A mode. The [A Rec. Mode] menu appears. Use the four-way controller (23) to select [Face Detection]. 3 4 Press the four-way controller (5). A pull-down menu appears. Use the four-way controller (23) to select an option. On Smile Off The camera detects a person's face. The camera automatically release the shutter when your subject smiles. [. . . ] Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. The above named party is responsible for ensuring that the equipment complies with the standards of 47CFR §15. 101 to §15. 109. Product Name: PENTAX Digital Still Camera Model Number: Optio S1 9 Appendix 216 Contact person: Customer Service Manager Date and Place: March, 2011, Colorado Information for Users on Collection and Disposal of Old Equipment and Used Batteries 1. In the European Union These symbols on the products, packaging and/or accompanying documents mean that used electrical and electronic equipments and batteries should not be mixed with general household waste. Used electrical/electronic equipments and batteries must be treated separately and in accordance with legislation that requires proper treatment, recovery and recycling of these products. [. . . ]