User manual PENDRIVE SECUREPENDRIVE

[. . . ] SecurePenDrive User Manual Ver 1. 00 - B Page 1 Table of Contents 1 2 3 4 5 6 7 8 9 New Features······················ Important Notice····················· Main Screen······················ Setup password····················· Change password···················· Disable / Remove password················ Unlock device····················· Password hint····················· 3 3 4 5 7 8 9 10 Format························ 11 Page 2 New Features 1. [. . . ] From Mac OS 10. 1. 2 onward, Mac OS can support multi removable drives, so you will see two drives as you will in any of the Windows operating system Page 3 4. 5. Mac OS 10. 1. 2 and/or later Main Screen D A E B F C G A B C D E F G Set up / Change password Disable / Remove password Unlock Device Password Exist Status ­ tells you whether a password has been set up or not Device Lock Status ­ tells you whether the device is locked or not Forgot Password ?­ don't worry, let password hint remind you Format ­ allow user to set the capacity of the "protected" area Page 4 Apparatus A ­ Setup Password (1) Press "Set Password" to setup password, you will see the following screen (2) Enter a password of your choice. (maximum 16 characters long) (3) Confirm password by re-enter the password you set in (2). You can enter anything you want within 31 characters. 2 3 4 PS : Tick "Unmask Password" box to see what are you typing or what you have entered (5) Press "Set" to confirm changes. This message window tells you, that the device will be automatically locked after you remove the device from USB port. Page 5 (6) Once you have set up the password correctly, you will notice the change in "Password Exist" Status. NOTE When you remove the device from USB port and re-insert it again, the device will automatically be locked. (depending on the operating system, the error message will be different) If you execute the Security AP, you will see that the device is LOCKED. Page 6 Apparatus A ­ Change Password (1) If you have already setup a password before, you can change the password you set. Click "Change Password" to change. (2) Enter your old password (3) Enter new password of your choice (4) Confirm the new password by re-enter (5) Change password hint if you wish. PS : (i) Password Hint does not have to enter/change, if you don't want to use it or You want to use the old hint. [. . . ] eg: In this case, the protected area is a bit over 14MB and the unprotected area will be what ever is left. [. . . ]