User manual PEG-PEREGO VIAGGIO 2/3 SUREFIX

[. . . ] € This child car seat is classified as “semi-universal” and can be fitted on the seats of car models specified in the list attached to these instructions. € The child car seat can also be used in approved cars, fitted with safety belts with three static fixing points and winder, homologated in accordance with standard UN/ECE R°16 or equivalent regulations. € The use of safety belts with two fixing points or an abdominal fixing point is forbidden. € Carefully read the instructions before use and keep them in a safe place for future reference. [. . . ] 1_ IMPORTANT Inspect the content of the package and contact the Customer Care if some items are missing. _ The child car seat includes: 1 headrest (a), 1 backrest (b), 1 seat (c). The product supplied in its original packaging is ready for use and does not require specific assembly operations. 3• Lift the backrest of the child seat until you hear it click (Fig. The backrest can move between the two locks, as indicated in figure B. Lift the handle on the rear 24 2_ Components of the product of the backrest and position it at the desired height. IMPORTANT: as the child grows, it is necessary to adjust the height according to the stature of the child. IMPORTANT: after completing the operation, try moving the headrest to verify that it is correctly fitted in place. 5• Viaggio2/3 is fitted with two lateral and removable drink holders. 6• Viaggio2/3 is fitted with a reclination system that guarantees maximum comfort. To recline the seat, pull the handle on the front and simultaneously lift the seat. 7• If possible, recline the car’s backrest while the child is asleep and then recline the backrest of the child seat to the same slant. The Viaggio 2/3 backrest will adapt to the slant of the car’s backrest, guaranteeing greater comfort for your child. M gu ca sa 8• th ba str 9• Iso th Te pu to (A Features of the product Fitting the child car seat with the safety belts and Surefix fittings For cars fitted with Isofix hooks th to be fitt 10 of ho fro th ab pr th This method can be used only if the car is fitted with Isofix hooks. For further information on the availability of these hooks and their location, refer to the instruction Fi w Fo fit 11 in in th he ld ust he ng he is ral a es he nd r’s ep he pt st, for manual of the car. Surefix fittings guarantee a greater safety, but cannot replace the function of safety belts. 8• To stretch the Surefix hooks, press the button on the front inside the bag, as shown in the figure, and stretch them manually. 9• Fix the Surefix connectors to the Isofix hooks of the car seat, verifying that they “click” in place (Arrow A). Tension the belt and simultaneously push the child car seat (Arrow B) towards the backrest of the car seat (Arrow C). IMPORTANT: after completing the operation, try moving the seat to verify that the Isofix fittings have been correctly hooked to the Isofix fittings . 10• To detach the Surefix connectors of the child car seat from the Isofix hooks, press the button on the front inside the bag and release the connectors belts in order to be able to manually detach them by pressing the safety lever situated on the hooks, as shown in the figure. How to secure your child on Viaggio 2/3 12• Secure your child with the car safety belt as shown in the figure. [. . . ] Kontroller, at stolen ikke er for varm, førend De sætter barnet i den. VIGTIGT: efter at have udført operationen, prøv at bevæge hovedstøtten for at kontrollere, at det er monteret korrekt. For at læne stolen tilbage, træk i håndtaget foran og løft samtidigt stolen. VIGTIGT: efter at have udført operationen, prøv at bevæge stolen for at kontrollere, at Isofix-beslagene er korrekt fastgjort. [. . . ]