User manual PEG PEREGO VIAGGIO CONVERTIBLE

[. . . ] WARNING • Read the instructions carefully before use and keep them in the holder provided for future reference. Failure to closely follow the installation instructions for the car seat will put your child at risk. € The assembly and installation procedures for Viaggio1 Duo-Fix must be carried out by adults. The assembly and installation procedures must be carried out without the child in the car seat. [. . . ] € Do not remove the adhesive and stitched labels as this might mean the product is no longer compliant with standards. € Do not use the car seat if it shows signs of breakage or missing parts, if it is second hand, or if it has been subjected to violent stress in an accident, because it might have suffered extremely dangerous structural damage. € For any repairs, replacement parts or information on the product, contact the post-sales assistance service. € The car seat should always be secured in the vehicle, even when the child is not present. In the event of sudden braking, it could injure the occupants of the vehicle. € Do not use this car seat after five years from the date of production indicated on the structure. The natural ageing of the materials may mean that it is no longer compliant with standards. € Do not use accessories that are not approved by the manufacturer or by the competent authorities. 1• Place the Viaggio1 Duo-Fix car seat on the vehicle’s seat, facing in the normal direction of travel of the vehicle, as shown in the figure. 2• To make it easier to pass the vehicle’s safety belts through the back of the car seat, it is necessary to recline the seat to the lowest position by operating the lever, as shown in the figure. 3• Pass the vehicle’s safety belt between the frame and the shell of the car seat. 2 4• IMPORTANT: The straps must not be too high or too low with respect to the child’s shoulders. 2 5• The Viaggio1 Duo-Fix car seat can be inclined in 4 different positions, both when it is attached to the base and when it is attached to the Isofix Base 0+1. € To release the Viaggio1 Duo-Fix car seat from the Isofix Base 0+1, press the same lever in the same way (See Point 10). How to adjust the height of the head rest How to put the child in the Viaggio1 Duo-Fix car seat 1 4• Before sitting the child on the stroller, release the safety harness by pushing the red button in the buckle of the leg divider strap. 15• Lift the safety harness and attach the buckles to the elastics in the sides. 16• Sit the child in the stroller and adjust the safety straps round the child’s shoulders and waist, as shown in the picture. 17• Fasten the harness by overlapping the two straps and inserting the buckles into the leg divider strap until they click into place. 18• The child is sitting correctly with the safety harness fastened properly. 19• To tighten the strap, pull the central adjusting strap towards you as shown in the picture. IMPORTANT: Do not tighten too much (the harness should be loose enough for you to slip a finger between the strap and the child’s chest). 20• To loosen the safety straps, push the button in the middle of the car seat and at the same time pull the straps towards you. [. . . ] 3 9• fasten them properly in the back, as shown in the picture. € fasten the safety harness straps (point 17) 26 How to read the approval label • This paragraph explains how to interpret the approval label (orange label). € The label is double because this car seat is approved for two types of installation in cars: • ISOFIX attachment systems (the term SEMI-UNIVERSAL class A indicates compatibility of the car seat with vehicles fitted with this system). 8• Maak de riempjes langer en steek ze in het basisdeel van 3 het zitje, de riempjes in de opening boven en de gesp in de opening onder. [. . . ]